Isaac Ristow
Latest activity Postings About
-
-
Isaac Ristow replied to the thread 7.3 idi build for my S1654.Yes I will be doing that. It will be wrapped in header tape to help retain heat. Driveshaft is in I took it for a spin naturally... -
Isaac Ristow reacted to ut99dot1's post in the thread Cylinder anti carbon treatment requests with
Like.
Hi, in about 1 month I'll swap out my engine (1.6IDI), but before doing that I'll try the berryman anti carbon treatment. If there's any... -
Isaac Ristow replied to the thread 7.3 idi build for my S1654.Would have to get creative to do that and allot more cast iron welding since these are factory cast manifolds. I'm sure it probably...
-
Been a long time since I've been on here, and saw someone shout out an RIP for Russ. Truly a huge loss. I was 17(?) when I drove up to...
-
Isaac Ristow replied to the thread Mechanical Water Temp Gauge Failure.A mechanical temperature gauge is nothing more than a pressure gauge. The bulb the goes in the water jacket is usually filled with...
-
Isaac Ristow replied to the thread drive line angle.I have always been told the shaft ahead of the hanger needs to be at same degree as the engine/trans. I have a inclinometer app on my...
-
Isaac Ristow replied to the thread 7.3 idi build for my S1654.It will have all the exhaust going though the turbo. It will have a crossover pipe between the 2 original manifold outlets just like a...
-
I love it! That's my new favorite way to mount a water to air CAC! :Thumbs Up
-
Isaac Ristow replied to the thread What to consider when building a 7.3 IDI?.I just put a update on it figured it was time it is on this forum
-
Isaac Ristow replied to the thread 7.3 idi build for my S1654.
-
-
Isaac Ristow replied to the thread 7.3 idi build for my S1654.As an update the engine is in the truck and running along with the 13 speed transmission. Intercooler water system has been plumbed to...
-
Isaac Ristow replied to the thread What to consider when building a 7.3 IDI?.I built a 7.3 for my international s1654 medium duty truck over the winter the engine is in and running I'm waiting on my driveshaft to...
-
Isaac Ristow replied to the thread T19 to ZF5 1986 F250.I haven't done it but read multiple times the 87 6.9 could come with a zf5 and they used a smf still same as the t19 flywheel. So if...
-
-
Loading…
-
Loading…
Latest posts
-
-
6.9 IDI E350 Van died while running, and no longer cranks- Latest: BeastMaster
-
-
-