Recent content by IDIMAN94

  1. IDIMAN94

    New to making WMO+Watf

    Welcome to the wmo world. I personally have a 65gph pa centrifuge that I bought 2 1\2 years ago. Ive made about 3500 to 4000 gallons of fuel with it. The only thing I have had to replace is the o rings in the rotor and hat from swelling. My drain port is about 4 inches from the bottom but I...
  2. IDIMAN94

    Bricknose bumper and headache rack action!

    Great job. I really like the headache rack. Awesome scores!
  3. IDIMAN94

    Rock Auto discount code

    1863614916148849 expires January 19, 2014
  4. IDIMAN94

    Waste Fuel Shut Downs

    I do not have a so called clean tank, as the last time I ran straight pump diesel was about 3 months ago when I started getting a little smoke at idle. I hooked up to a loaded trailer and took it for a good drive, and it cleaned everything right up. Now during my wmo experience I have taken...
  5. IDIMAN94

    im an official oilburner

    Congratulations on successfully running wmo! Got to love driving around on free fuel.
  6. IDIMAN94

    who has the best centrifuge?

    Great choice. I have this exact fuge and have made over 2500 gallons of fuel with it. No problems except the occasional o-ring in the rotor.
  7. IDIMAN94

    Anyone run Rotella 15w40

    I dont mind changing oil at all. Its just something u have to do to get the bigger ticket jobs into the shop. Theirs no driving at my shop, I answers phones, wrench, collect money, wrench somemore, answer more phone calls, and collect more money. His truck is still running great. He was...
  8. IDIMAN94

    Those of you using the 250 gal totes

    I personally think IBC totes r the way to go if u have the space. I have 4 of the 325 gallons size ones. I keep 3 in my garage and the 4th I use to trans port oil in. I do not pull oil from the bottom of the totes. I pump from the top and the main reason for that is, what...
  9. IDIMAN94

    Anyone run Rotella 15w40

    This is the first time I have heard about Rotella having problems in a diesel. I use Rotella 15W40 in my 94 and not had any problems with consuming oil like I have read here. I go threw 1 1/2 quarts in a 3000 mile period, and that is mainly due to my pass side valve cover leaking. The...
  10. IDIMAN94

    460 Clutch behind 7.3 with ZF-5

    I dont think the 1/16 of an inch will make a difference. I have a brand new Valeo clutch kit and the instruction/ application guide says it fits 92-97 7.3L Diesel and 7.5L Gas engines. It is a 12.25 for a SMF, so I think the diesel and gas would be the same
  11. IDIMAN94

    16 months of my WMO use

    No I dont have any pics of my set up but its just the 65 gph PA Bio Diesel centrifuge kit. All I provided was a 55 gallon steel drum and a pallet to put it all on. I personally have not messed with my timing as my truck runs good on my mix and straight diesel. But I will be experimenting...
  12. IDIMAN94

    New WMO set up advice.

    X2 on a PA Bio Diesel centrifuge Great products and prices and even better customer service.
  13. IDIMAN94

    ANOTHER TRIP!!!!!

    WOW is all I can say. Glad everyone is ok and hope for a speedy recovery for all. Poor truck and trailer but something I learned when I started driving was vehicles can be replaced and people can not. U also be safe on your trip down and back.
  14. IDIMAN94

    16 months of my WMO use

    I have not had any stalling problems as I am running my 70/30 winter mix, but it did start to chuggle a little this past week at 2500 rpms and over, as the temps were 0 to 15, so it was cold. So I just ran straight diesel for a few days.
  15. IDIMAN94

    16 months of my WMO use

    I would highly recommend a centrifuge to clean your WMO. I know its a big chunk of change in the beginning but mine payed for it self in 5 months. . I do notice a little bit of power loss when running higher percentage of WMO, but I cure that with a little more right foot action. As for mpg...
Top