G
Gonzo5927
Latest activity Postings About
-
-
GGonzo5927 replied to the thread C6 fluid change advice?.Thanks again @Cubey just checked to make sure. Those two are accounted for.
-
-
GGonzo5927 replied to the thread C6 fluid change advice?.Just to clarify. By IN the filter… I mean within the filter screen trap.
-
GGonzo5927 replied to the thread C6 fluid change advice?.A couple oddities I need opinions on. I found this bolt in the old filter. It matches the filter bolts. I have filled all eleven filter...
-
-
GGonzo5927 replied to the thread C6 fluid change advice?.Going on as configured here with “straw” attached. Straws a little looser than before but I think it’ll work
-
-
GI will check that out. Appreciate the info!
-
GIt looks like a Titan Attachments gantry crane, they run about $1400 and have a 2 ton capacity.
-
GGonzo5927 replied to the thread C6 fluid change advice?.Thanks for posting @Cubey don’t see anything different from mine. Will just go ahead and install my filter as is. Had to go with WIX but...
-
GThe one I pulled from my RV.
-
GGonzo5927 reacted to Old Goat's post in the thread Heater core replacement - right core - correct hose routing? with
Like.
These are the valves I used from Summit Racing. https://www.summitracing.com/parts/fss-84706 Goat -
GGonzo5927 reacted to ttman4's post in the thread Heater core replacement - right core - correct hose routing? with Like.
I'm same way as you Goat on my '90 & '92, 5/8" hoses as well as ball valve on both hoses.
-
GGonzo5927 reacted to Old Goat's post in the thread Heater core replacement - right core - correct hose routing? with Like.
Hoses on my 86 are both 5/8". Also don`t have a restrictor as far as I know. I do have a manual shut off valve on each hose, so I can...
-
GGonzo5927 reacted to mf7lakes's post in the thread Heater core replacement - right core - correct hose routing? with Like.
5/8 worked for me -- all fittings were same size
-
GGonzo5927 reacted to IDIBRONCO's post in the thread Heater core replacement - right core - correct hose routing? with Like.
You can go into a parts store and buy 5/8" heater hose in bulk. They sell it by the foot.
-
GGonzo5927 replied to the thread C6 fluid change advice?.By process of elimination I’ve found the nut to be 1 3/16 for anyone that needs that info in the future! Now filter comes in tomorrow...
-
-
GMy RV had a 4x4 filter when I changed the fluid in 2020 without the dent put in the filter or the pick-up thing.
-
-
Loading…
-
Loading…
