Clb's latest activity
-
Clb replied to the thread Electrical adventures thread - I blew or burned out something....Previous owners and geellectric :frustrate I pulled out 2 shopping bags of primarily exess trailer harnesses outta my 88 -
Clb replied to the thread Charging question.Nawww Just a confirmation of my earlier post about corrosion...
-
Clb replied to the thread Charging question.LucasTheePrinceOfDarkness Has visited upon you the medallion of old age
-
....it's got ..... the cancer......
-
Another hint at finding the bad connection... Disconnect the ground of one of the batteries. Attempt a quickie start. You don't need...
-
Clb replied to the thread Charging question.Ok for stationary equipment. They place a lot of stress on the terminal. I would do a junction block for the extra take offs.
-
Clb replied to the thread Crank no start intake vapor!.:Thumbs Up No coffee colored ****
-
Clb replied to the thread Charging question.Testing to see if the wire has resistance... If the internal resistance is high due to corruption of any sort, it wont flow power as...
-
Clb replied to the thread Hard start, when warm outside..Trick question #'s 3-5 are interchangeable... Sorta:popcorn
-
Clb replied to the thread Hard start, when warm outside..There are a fair amount of stickies and tech 101 threads here that will answer your questions. But look at these first in the tech...
-
Clb replied to the thread Charging question.Parasitic loss will account for a little bit of this. But probably not 1.6 volts worth. Are both leads solid and clean on the contact...
-
86 F250 7.3 IDI with Hypermax Turbo and more... Idle water temp at 70* ambient, engine fully warmed, 170ish Cruising water temp at 70...
-
Clb replied to the thread Double OD with E4OD.With the Speed Sensor in the axle should be fine. I dunno much on e4od stuff... That said I'm going to run this by you for grins and...
-
Clb replied to the thread Engine Running Cold.Goat hit on something... Temp gun. Ok so old codger statement... Do fill in the truck stats in your sigline, so we know what we are...
-
-
Clb replied to the thread Engine Running Cold.Don't open a hot radiator unless you have a lever vent cap. And then still cover it with a towel so if it steams/spits up you are...
