Recent content by 84TD

  1. 84TD

    Needed: FIPL / TPS bracket for IDI pump for my E4OD swap

    Thanks cpdenton, a local guy hooked me up with one for 10 bucks. I will test the sensor on it and if it isnt right Ill PM you for a another used sensor.
  2. 84TD

    For Sale: 1989 Ford Camper Van, 7.3 IDI, Hypermax, E4od

    Whats the hwy MPG?
  3. 84TD

    Needed: FIPL / TPS bracket for IDI pump for my E4OD swap

    I think thats all im missing. If it has a good TPS on it that is a definite bonus!
  4. 84TD

    Need advise on front spring leveling and front frame ID

    Based on what I have found online it seems there are 62-77 springs, 77.5-79 springs, 80-96 springs and superduty springs.
  5. 84TD

    Need advise on front spring leveling and front frame ID

    I would appreciate it. Also if you could tell me the center pin hole that would be helpfull. I am going to see if I can make this "mini pack" work, its made for superduty, 3" wide but the center pin hole is 7/16 and I think mine takes a 5/16. Maybe I could sleeve it or something to take the...
  6. 84TD

    Need advise on front spring leveling and front frame ID

    How much did they charge you for springs? There is a spring shop here local but they want $600 to start and an unknown amount more to add or remove leafs to level the truck. Thats not in my budget. I am not even sure I could just order something anyway... the problem with my truck is since its a...
  7. 84TD

    Need advise on front spring leveling and front frame ID

    I dont think I can run an RSK, my rear shackle is integrated into the frame. My intent is not to lift, I like my ride height, just to get rid of that 3rd spring and replace it with 1 or 2 more smaller helper springs.
  8. 84TD

    Need advise on front spring leveling and front frame ID

    Did you see whats there now? Its super ****. They are basically ghetto add a leafs. I was thinking about trying to buy just 4" lift springs for a 77 F350 but I haven't found anywhere that would sell just springs. I was hoping that removing the ghetto leaf and adding the add a leaf would keep the...
  9. 84TD

    Need advise on front spring leveling and front frame ID

    It looks like something like this would work then http://www.summitracing.com/parts/sja-f46d/recommendedparts The compatibility is for 77-98 so I guess it doesn't matter which leafs I have anyway.
  10. 84TD

    Need advise on front spring leveling and front frame ID

    My truck rides like a rock in the front, almost no travel at all. If you look at the pics the builder used a torch cut spring to level the truck in the front. I am looking for a leveling kit to replace that bottom cut spring, the kind you would use if you added a giant snow plow or something...
  11. 84TD

    Bumping the Governor

    Hauling ass generally. I dont tow or work my truck, its just my daily driver.
  12. 84TD

    Bumping the Governor

    My truck seems to hit 3200 really fast in second and third and feels like it want to keep pulling. Is it common to modify it to come on a little later? Is it dangerous for the engine?
  13. 84TD

    The Official 2014 IDI Weekend truck rally

    where is the smoke pics and videos? :peelout
  14. 84TD

    Baumann Controller

    Are you sure you need tach signal? I am also going this route when I swap in an E4OD and I do not have a factory tach. According to the manual they only need a TSS(VSS) and TPS. http://www.usshift.com/downloads/E4ODmanual.pdf
  15. 84TD

    7.3 IDI in a 79 f250

    @ NTOLERANCE - The trails there look amazing! It looks like our trucks have about the same wheelbase, do you have a D60 up front? I have a kingpin D60 and my turning radius is so bad when I am off road I am constantly doing 3 point turns and I hate it. Same for you or have you found a way to...
See more

Latest posts

Forum statistics

Threads
91,283
Posts
1,129,784
Members
24,099
Latest member
IDIBronco86

Members online

Total: 736 (members: 9, guests: 727)

Share this page

Top