-
-
Ffranklin2 replied to the thread 1989 7.3 voltage regulator on a 1986 Harness. Will it work? What is the 4th terminal.What are all the color wires leaving the alternator? Do you have a external voltage regulator? What year truck are you working on?
-
Ffranklin2 replied to the thread Underhood vacum.Remember the servo has two vacuum lines going to it. One is the supply, the other one leads to under the dash and goes to a mechanical...
-
Ffranklin2 replied to the thread Grease for driveshaft slip yoke splines?.Be careful saying that. For example you have wheel bearing grease which is much thicker than chassis grease. We were also where I work...
-
Ffranklin2 replied to the thread Exhaust Manifold Removal.The one new one I put on was a Dorman and it seems to work fine so far.
-
Ffranklin2 replied to the thread Exhaust Manifold Removal.You have to admit these engines are noisy. I drove mine for several years and had several inspections till it opened up bad enough for...
-
Ffranklin2 replied to the thread Exhaust Manifold Removal.About a year ago I was panicking because they were out of stock on the driver's side. I did not need that side, but the pass side was...
-
Ffranklin2 replied to the thread Exhaust Manifold Removal.I see you can get the left or driver's side manifold now(double the price though). For awhile you could only get the pass side new.
-
Ffranklin2 replied to the thread Exhaust Manifold Removal.This little set of "socket easy outs" saved my bacon when I did this job. The bolt heads are so disintegrated, no socket was going to...
-
-
Ffranklin2 replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.When you do serious work like this on one of these leaf spring frontends, you come to realize how much of a bind the front leaves and...
-
Ffranklin2 replied to the thread Fuel tank showerheads.Yes, 4 prong would be for a 460 equipped truck with the hot fuel handling option(which most had) which had a lift pump inside each tank...
-
Ffranklin2 replied to the thread Clinking( metal clicking) noise when rolling.There is no adjustment for the brakelight switch. It uses that hokey setup that Ford came up with years and ago and used on all their...
-
Ffranklin2 replied to the thread Clinking( metal clicking) noise when rolling.Just remember, a rotation squeak in the u-joints is going to be 3.5 to 4 times faster than a squeak out at the wheels/brakes.
-
-
Loading…
-
Loading…
