Ok folks, here we go, I am going to post pics of everything at this time.
I'll take reasonable offers on stuff. I live right on the Can/US border near Oroville WA Zip 98844. I sometimes have challenges entering the US though mostly it's ok.
I am also willing to TRADE parts as well, for anyone willing to barter.
(FENDERS are Pending in a deal with another member here)
Fenders are on a 80-86 Bronco and are after market replacements, the Dr side has a small crease which can be seen in the close up 5-10 mins of body hammer n dolly and it's golden.
The 1/4 on the passenger side looks like it's blistering rusty in the pic though it is not it is solid.
The tinted rear slider is ok just missing the small plastic part the folding clip part attaches too.
The Front bumper is bent, needs some welding, and seeing as I could not get to the bumper bolts, I had to use 4.5" grinder to grind off the heads of the bolts to knock off the bumper.
The Grille seen on the bumper in the back as well as on the front of truck is a freebee, it has some issues with loose bars and being aluminum, it's slightly bent.
I'll take reasonable offers on stuff. I live right on the Can/US border near Oroville WA Zip 98844. I sometimes have challenges entering the US though mostly it's ok.
I am also willing to TRADE parts as well, for anyone willing to barter.
(FENDERS are Pending in a deal with another member here)
Fenders are on a 80-86 Bronco and are after market replacements, the Dr side has a small crease which can be seen in the close up 5-10 mins of body hammer n dolly and it's golden.
The 1/4 on the passenger side looks like it's blistering rusty in the pic though it is not it is solid.
The tinted rear slider is ok just missing the small plastic part the folding clip part attaches too.
The Front bumper is bent, needs some welding, and seeing as I could not get to the bumper bolts, I had to use 4.5" grinder to grind off the heads of the bolts to knock off the bumper.
The Grille seen on the bumper in the back as well as on the front of truck is a freebee, it has some issues with loose bars and being aluminum, it's slightly bent.
Attachments
-
resized-parts Bronco Dr fender 1.jpg28.9 KB · Views: 2
-
resized-parts Bronco Dr fender crease.jpg14.4 KB · Views: 2
-
resized-parts Bronco Ps Fender 1.jpg24.2 KB · Views: 4
-
resized-parts Bronco Rear PS quarter.jpg26.4 KB · Views: 3
-
resized-Front Bumper n scrap.jpg43.7 KB · Views: 5
-
resized-Smoked R Slider.jpg30.9 KB · Views: 3
-
Rolling off deck truck.jpg863.3 KB · Views: 6
-
Truclk unloaded.jpg860.6 KB · Views: 4
Last edited: