furfishgame
Registered User
I have a 1990 7.3, the heater sucks, (take into account it is winter in alaska) the guy i bought it from said he replaced the heater core, though he also said he isnt much of a mechanic, anyway.
I cant find i diagram saying which hose goes where, i have a line comming from the front of engine below oil fill cap (water pump?) the other goes into engine block above passanger side exhaust manifold.
The one comming from water pump is going into the driver side fitting on my core, the line from the block above exhaust manifold attaches to fitting on the passanger side of the core. (far right facing engine) is this the correct hookup?
Also, My temp guage only gets between first line and the "N" on my gauge, but all my lines are plenty hot so i dont see this being the issue as it stays there no matter if its 90 degrees or 0... Any help would be greatly appreciated
I cant find i diagram saying which hose goes where, i have a line comming from the front of engine below oil fill cap (water pump?) the other goes into engine block above passanger side exhaust manifold.
The one comming from water pump is going into the driver side fitting on my core, the line from the block above exhaust manifold attaches to fitting on the passanger side of the core. (far right facing engine) is this the correct hookup?
Also, My temp guage only gets between first line and the "N" on my gauge, but all my lines are plenty hot so i dont see this being the issue as it stays there no matter if its 90 degrees or 0... Any help would be greatly appreciated