No I used the TSC Majik truck/tractor/implement stuff. That's what I did the rest of the frame in. I brushed it on the frame because it was dead of winter. Sanded lightly then hit it with another coat with the gun before I shot the black on. I used the flat black with hardener which makes the matte black not matte black... by a lot. Gloss rattle can matches pretty good. I went that route so it would be easy to touch up as I go. I figure with the frame sandblasted, it ought to be good long enough that I won't care when it falls off. I cheated and rattle canned the primer on the housing because I was in a hurry and didn't have time to clean up the gun last night. I'll probably try to get the paint on it tomorrow.
The spring blocks were Amazon. Pro Comp. Best price I found. Say they are for a newer truck.
http://www.amazon.com/gp/product/B005F0M828/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
The research I did says they should work. I found a review for the same PN that the guy said he used them on his 92 and they fit perfect. They look right in the picture. Didn't get them out of the box last night. Looks like I will have a spare set of U-bolts. They or may not be the right length. I'll let you know how they work soon.
The spring blocks were Amazon. Pro Comp. Best price I found. Say they are for a newer truck.
http://www.amazon.com/gp/product/B005F0M828/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
The research I did says they should work. I found a review for the same PN that the guy said he used them on his 92 and they fit perfect. They look right in the picture. Didn't get them out of the box last night. Looks like I will have a spare set of U-bolts. They or may not be the right length. I'll let you know how they work soon.