Oil is flowing finally... still waiting on the HP fitting for the pump but I've got 50+ gallons to gravity feed through a 2mic. filter.. so no rush on the fitting. Lol
Here is what I ended up with although after using it tonight, I want to change it up as it doesn't work as well as I want it to.
Old SBC pump I used to use for pick-up and the mixing drum
You must be registered for see images attach
Use the SBC pump to push oil through the 10 mic. filter (mainly used this because I didn't want to buy anymore fittings and I had two different hose sizes.. 5/8" off the pump and 3/4" to the barrel... the filter was 3/4 on both sides but I had a spare 5/8 barb that fit the filter.. so I went with it)
You must be registered for see images attach
Settle barrel currently full
You must be registered for see images attach
Gravity flow from 5" stem pipe inside settle drum through 2 mic. absolute Cim Tec filter into the 'fuge drum.
You must be registered for see images attach
Should be ready to fire up the 'fuge by Friday... planning on a full 20hrs this batch. I'm curious to see if not allowing any oil to actually bypass the centrifuge will make any difference. Still need to mount the pump and filter for the finished barrel that has the nozzle... Should have everything up and running by Saturday for a full test.
More to come soon if all goes well.