I need gears!!!!

[itsacrazyasian]

I gotta ditch these 3.55's out of my truck. So if you guys don't know, 37" goodyears, 3.55, zf5. Crusing along at 40 at under 1K .

You must be registered for see images attach

but my tow capacity seriously got cut. Me taking off from a stop with ~3500lb in the bed.

You must be registered for see images attach

it was never this slow!!!! Anyone want to trade for 4.10?

 

[91dirtydiesel]

Ill sell you some g2 rearend gears 410 ratio brand new with install kit for cheap

 

[itsacrazyasian]

i need a complete rear. mine is a semi float 3.55.

 

[flareside_thun]

Talk to your fellow short tribe member...if he don't have one, I know where a 4.10 Open carrier 4.10 is out of a 92.

 

[MUDKICKR]

i have a complete 10.25 sterling 4.56 posi that has super low miles on it. i thought it was the perfect rear end gears for the 37s and zf5 i had in my truck

 

[wmoguy]

I'd swap you straight across for the 4.10's in my 94 if ya want. Now would be a great time since the truck is down anyway

 

[itsacrazyasian]

but you are in WV!

I talked to billy about this before. but i really discovered the need for them today. now that i think about it, its alot more than 3500lbs.

i got a line on a van rear. If it bolts right in.

 

[hairyboxnoogle]

I have 3.55s zf-5 7.3 NA and 35" tires and i dont mind it. You can always shift down.. but going up you run out of gears. I was moving river rock for a week or so doing some landscaping at this place. We rented one of those all purpose heavy duty dump trialers. Was loaded to the point i was starting to wonder about the tires on it. At one point i even had to start from a dead stop up a pretty steep hill.. id say 20% grade or so maybe more. Never had a problem. out on the freeway was fine, cruising 65ish in 4th at 2200. 2nd to 3rd gets a little long when loaded that heavy but id rather cruise 70 at 2200 in OD than 3k. Not sure how heavy the rock was, but i towed a scrap pickup in a week later, weighed in at 13,200, the rock was ALOT heavier. the scrap pulled about like the rented trailer did empty. So i guess moral of the story, i expect ill be about right with the 37s or 39s with the 3.55s. Oh took it to the track too ran a 17.38 @ 73 mph.

 

[typ4]

most vans are dana 60

 

[MUDKICKR]

but you are in WV!

I talked to billy about this before. but i really discovered the need for them today. now that i think about it, its alot more than 3500lbs.

i got a line on a van rear. If it bolts right in.

your right i am in WV, but i will be going to Road Atlanta to race my motorcycle sept 17th-18th, that would put me in Georgia if your interested.

 

[snaponprofile]

What gear were you in? I have 4:10's and 33 inch tires, I go 65mph at 2000 rmps in 5th.

 

[flareside_thun]

What gear were you in? I have 4:10's and 33 inch tires, I go 65mph at 2000 rmps in 5th.

WTH? I have 35's and 4.10's and do 65 MPH at 2350 rpm

 

[DontKnowJack]

I'll trade you mine if they will swap easily. Maybe someone on here can tell us.

 

[snaponprofile]

WTH? I have 35's and 4.10's and do 65 MPH at 2350 rpm

Did you recalibrate your speedometer?

 

[flareside_thun]

No but I have a GPS.