i made a diagram before i took them out.
noted cam side and arrow that was etched in the piston.
obviously the valve reliefs and precup indent go twards the cam.
the rods were stamped outboard, meaning all stamps were visable while uninstalling.
the weight at the top of the rod goes opposite of the cam side.
will refer to stamping during install
noted cam side and arrow that was etched in the piston.
obviously the valve reliefs and precup indent go twards the cam.
the rods were stamped outboard, meaning all stamps were visable while uninstalling.
the weight at the top of the rod goes opposite of the cam side.
will refer to stamping during install