ifrythings
Full Access Member
Some background info
7.3 fresh rebuilt engine with turbo internals,
Balanced
J2 cam
Studs
093 turbo system with rebuilt kit done, 3" outlet mod with 3" down pipe and 4" the rest of the way with open/ free flowing muffler.
New stanadyne G code injectors
Ip is a used one from my old motor that worked just fine and was NA and timing set at 8 degrees ferret method.
On cold startup it will run a hard to see blue haze till the high idle and cold advance kicks off then it looks fine, no white or black fuel smell that I could tell.
On driving, if I hit it ******* the go pedal it will just blue out behind me like no tomorrow till I let off, if I'm easy it stays clean.
I have not yet turned up the pump for the turbo, do I have too much timing for this engine? Is this a turbo issue? Hot or cold side leaking oil (though I don't see any oil in the exhaust)? Rings just not seated yet? Don't seam to be loosing oil that I can tell.
Also electric fuel pump that's 5psi at idle dropping to 3 or 4 psi 3000rpm no load.
Any input is appreciated!
7.3 fresh rebuilt engine with turbo internals,
Balanced
J2 cam
Studs
093 turbo system with rebuilt kit done, 3" outlet mod with 3" down pipe and 4" the rest of the way with open/ free flowing muffler.
New stanadyne G code injectors
Ip is a used one from my old motor that worked just fine and was NA and timing set at 8 degrees ferret method.
On cold startup it will run a hard to see blue haze till the high idle and cold advance kicks off then it looks fine, no white or black fuel smell that I could tell.
On driving, if I hit it ******* the go pedal it will just blue out behind me like no tomorrow till I let off, if I'm easy it stays clean.
I have not yet turned up the pump for the turbo, do I have too much timing for this engine? Is this a turbo issue? Hot or cold side leaking oil (though I don't see any oil in the exhaust)? Rings just not seated yet? Don't seam to be loosing oil that I can tell.
Also electric fuel pump that's 5psi at idle dropping to 3 or 4 psi 3000rpm no load.
Any input is appreciated!