Search results

  1. J

    air intrusion

    Thanks Bio That would be mighy nice if it is that simple. I hope to solve the problem this weekend.
  2. J

    air intrusion

    I have an 88' F250 non turbo that wont start after it sits for about a hour. I unscrewed the filter and it is only about 2/3 full of diesel after it sits over night. I have replaced the injector o-rings and caps and there is no fuel leak. What is the best way to narrow down where the air is...
  3. J

    New fuel tank or (s) needed

    I have a brand new plastic bronco tank sitting in the shop if you need one, also have the stock rear one. Jason
  4. J

    Bronco Tank

    I am not sure about the sending units...i did not make it that far. I assume a stock bronco sending unit would work. Jason
  5. J

    Bronco Tank

    Here is a link to the tank I have. I purchased it from bronco graveyard and went another route instead of using the bronco tank. The bronco tank would not work with the hitch and bumper set up that I wanted. http://broncograveyard.com/bronco/i-30216_gas_tank__33_gallon_plastic_90-96.htm...
  6. J

    Bronco Tank

    I have a brand spanking new bronco tank for sale. I just bought it from bronco graveyard, but have decided to go another route.cookoo I have $160 in it, I am looking to get $130 shipped out of it. It is not a steal of a deal but will save you $30 or so. I am located in South Georgia if...
  7. J

    Bronco tank question

    Seawalker, I am putting a bronco tank into my 88' f250. I removed the front tank and I am only going to have the one 33 gal. tank in the rear. My cross over in the truck is bad, it is stuck on the front tank. To fix the problem so I could run the truck around the shop, I just swaped the fuel...
  8. J

    Bronco tank question

    One more question on the fuel issue. If I do away with the cross over completely and unplug it will the gauge still read? Or will I have to do something else with the cross over electrical plug so that it will know to read from the back? I took out the front tank and am only going to have the...
  9. J

    Bronco tank question

    Thanks for the pics Seawalker! Yes it is going into an idi, it is an 88' ford f250. I think this is the route i am going to take and making my own straps out of some flat metal. Thanks for the help
  10. J

    Bronco tank question

    Hey Agnem I was reading an old post where you used the bronco sending unit...what had to be done to get the gauge working correctly? Do they have the plugs? Thanks Jason
  11. J

    88' F-250 4x4 transfer case problems?

    Man how did this post get brought back up? I replaced the transfer case and the problem was solved. I never took apart the old one apart. Oh and yes it was a zf5. Jason
  12. J

    Bronco tank question

    Is this the correct tank that I need for an 88'? http://broncograveyard.com/bronco/i-30216_gas_tank__33_gallon_plastic_90-96.htm My sending unit is also bad, so do I just need to buy another for the factory tank and lengthen them? Thanks for the help! Jason
  13. J

    88' F-250 4x4 transfer case problems?

    I am not one to normaly post but I am stumped! The truck will not go into reverse unless it is in 4-lo. I just put a new clutch and remaned trans in today and everything else looked good and sounded good. I noticed the transfer case had a piece of metal in the bottom while draining the fluid. (I...

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,124
Members
24,120
Latest member
SixFourShanks08

Staff online

Members online

Total: 574 (members: 11, guests: 563)

Share this page

Top