Search results

  1. S

    glowshift egt gauge acting up..

    Last July I purchased three flowchart gauges. Installed all the they were working flawlessly. Just this summer my egt gauge needle started to drop to zero if I turned my turn signals on our shut my lights off and occasionally when I released the brake pedal. Now all the of these gauges are wired...
  2. S

    tps wire voltage

    Yesterday I installed a new tps. The old one was causing my new Tranny to shift erratically. The voltage on the wires seem to be off from the write up I read on here. When plugged in the top wire (orange and white) I get .01 voltage. Middle is 1.19-3.85. And bottom black wire is 4.99. I thought...
  3. S

    16x10 alcoa's with 285/75/16 tires with 6/32's

    I don't have any idea what they are then. Sold as of right now.
  4. S

    16x10 alcoa's with 285/75/16 tires with 6/32's

    I have a set of 16x10 alcoa's painted black with 285/75/16 cooper discoverer tires with 6/32nd. I am asking 400 obo. Need to sell these so make an offer.
  5. S

    Alcoa aluminum 16x10 rims with Cooper Discoverer atr tires value?

    I was thinking of selling my wheels and tires that are on my truck and going back to a stock size tire for better towing, plowing and fuel economy. Tires are 285/75/16 The Alcoas are painted black because the finish was looking ugly. Now they look good again. Tires have about .280 thou. depth of...
  6. S

    need value on truck

    Looking at a 98 ref can long bed 12 valve. Has 234000 5 speed original owner. Very rusty needs both front fenders, both rear wheel lips, both rockers and bottoms of both doors fixed to be a really nice truck. Heater core is leaking, both side mirrors are cracked as is windshield. Fuel tank...
  7. S

    can't get mpg up...

    Yea it's a diesel tq converter the gut that did it is big on e4ods and a family friend that knows about diesels. I had the timing awry at 10.5 once and I thought it was gonna come apart in me lol.
  8. S

    can't get mpg up...

    Tps is set to spec, fan clutch works great I think I weigh in at like 6600 empty. Just checked Speedo with GPS and it is almost exactly on. I have a recently rebuilt transmission that's had a custom tq and shift kit put in. I drive mixed but I have purposely taken the truck on solid highway...
  9. S

    can't get mpg up...

    New water pump up front. Everything else seems fine. New alignment last fall, tires good on pressure. I drive 55 or under all the time. Truck feels real strong, almost no smoke when hard on it everything looks and feels rights just mpg sucks..
  10. S

    can't get mpg up...

    Tires are 285/75/16 don't know how to figure that math compared to stock tires.
  11. S

    can't get mpg up...

    Ok here's the deal 94 7.3 turbo new IP and injectors, timing set to 8.5-9.3. Truck has 4.10 rear end. New lift pump, synthetic gear oils in front and rear and I still can't get over 12 mpg highway. Pump and injectors now have 5000 miles on them. I have tried driving very easy and very hard...
  12. S

    New Noise ?

    My truck has been doing that for a while say 20,000+ miles. Only will do it when the temps are really cold and upon first start up. Only does it for 2-3 seconds max then goes away and gets quiet. Put new ip and injectors in from a reputable guy and it didnt fix anything. I wasnt trying to fix it...
  13. S

    Conestoga Diesel=Extremely Satisfied Customer!!

    Recently I purchased a new IP and set of injectors from Mel and Suzi at conestoga diesel. My wife and I got the chance to meet them this past friday. Being a business owner myself, it was truely a breath of fresh air to see someone so passionate about what they do for a living. They were some of...
  14. S

    Stock Downpipe Wanted

    I am looking for a stock downpipe for a 94 factory turbo IDI. If anyone has one they are gonna scrap let me know please. I am looking to do some experimenting. Thanks
  15. S

    Set timing in Butler, Pa

    Looks like we have the whole state covered then lol!!
  16. S

    Set timing in Butler, Pa

    Set your timing in Butler, Pa(For Anyone) Hi guys I purchased a timing light and ferret adapter and set the timing on my truck today. So, if anyone is near Butler, Pa and needs there truck set and doesnt have the extra money to buy the stuff, pm me and I will help whoever I can out!! Thanks!
  17. S

    CNG Injection

    I have a compressor and a tank, I just need to see if it is safe. I dont want to blow head gaskets and I get what you are saying now about the fuel issue. Is it safe to use with propane at all or only natural gas?
  18. S

    CNG Injection

    my CNG injection has a regulator that determines the amount of cng to flow into the intake by the amount of air flowing through. The more air flow the more cng it injectes. I just want to know how to reduced the amount of diesel fuel going to the motor beings im going to be injecting cng into...
  19. S

    CNG Injection

    I am going to be installing a CNG injection unit on my 94 td. I want to run as little diesel as I possibly can. How would I turn the fuel down to do this? I was thinking with the fuel screw on the pump but I wasnt sure if you can turn it down too much and the screw come out of the mechanism...
  20. S

    New noise after hypermax cowl intake install

    ok thats what I thought just wanted to run it by your guys. Thanks!
  21. S

    New noise after hypermax cowl intake install

    I recently installed a hypermax cowl intake, fixed a up pipe leak and have way more power. But, when you are in the throttle say getting on the highway when the truck shifts I hear a sound from in the cab. It sounds like a shhhhhhhhhhh.....when it shifts or if Im pulling a hill and get into the...
  22. S

    Anyone near butler, pa that can time my truck?

    I have called over 10 mechanincs in butler and none have the capability to time my truck. Is there anyone handy to butler, pa that can?
  23. S

    Need new turbo. Buy used or get rebuild kit?

    how do you go about measuring it accurately? All I have is a set of calipers.
  24. S

    Need new turbo. Buy used or get rebuild kit?

    Ok. I got really really worried for a second. Its not rubbing on the housing even if I do push on it. My friend has a cummins and he took a look at it and said that his turbo has no shaft play so we were thinking mine was toast. I am knew to this so I apologize for sounding like an idiot. Thanks
  25. S

    Need new turbo. Buy used or get rebuild kit?

    Well I have never measured the shaft play. But the wheel is not rubbing on the housing or anything but how much play is acceptable in that situation?

Latest posts

Forum statistics

Threads
91,339
Posts
1,130,627
Members
24,140
Latest member
placidoert

Members online

Total: 167 (members: 2, guests: 165)

Share this page

Top