Recent content by motoneil

  1. M

    oil leak

    The edges of the lift pump gasket are dry and there is not a large amount of oil in the general area either. I am either thinking front main seal or value cover gasket. I just do not want to be replacing parts and chasing problems.
  2. M

    oil leak

    I have recently discovered an oil leak while replacing radius arm bushings. The oil is all over the passenger side from the front cover to the y pipe. The oil drips on the driveway directly below the started. I at first thought that it could be a front main seal, but the oil film extents too...
  3. M

    How rare are IDI E350 passenger vans?

    I had two of them, now down to one. 1992 IDI, 12 passenger.
  4. M

    Turbo for E series

    I know that Banks used to make a van kit as I had a 1994 van with one on it, but I have not found a van kit for sale yet. Mostly looking for a used kit as I do not want to double my investment in the vehicle. Only paid $1800 for it 3 years ago. Would be nice if the truck kit fits the vans too.
  5. M

    Turbo for E series

    I am in the market for a turbo for my 1992 van. I have done lots of looking and already know that the ATS kits will not fit. Will a banks kit for a truck fit the vans? This living at 4500 + feet with a n/a diesel is getting old. Last week I hauled 10k load of landscape bark and the van was...
  6. M

    mechanic in Phoenix/Yuma

    call Josh at 480 272 3496 at Dana Brothers
  7. M

    fuel filter leak

    That is great info since mine is leaking in the same place. I have been fighting fuel leaks for a while. I have replace the whole fuel system in the last year fixing one leak after another. I guess that these Utah winters are not as kind to parts as the Arizona desert.
  8. M

    FIPL help

    Yes, it was transfered but it was installed incorrectly. The adapter was not contacting the sensor. I repositioned the adapter and now I have voltage and correct shifting. Thanks for all the help. Now just to solve my perpetual fuel leak. I see the have a leak where the fuel bowl screws to the...
  9. M

    FIPL help

    I believe that I read that it was supposed to be the center wire in FILP plug.
  10. M

    FIPL help

    No problem before changing the IP. I installed a new sensor and the problem still persists. I am testing the voltage at the back of the plub.
  11. M

    FIPL help

    If there is not voltage going to the sensor, where should I look next?
  12. M

    FIPL help

    bump
  13. M

    FIPL help

    Last month I replace the IP and injectors. I have fought getting the FILP adjusted ever since. I bought a new sensor over the weekend and it did not make a difference. Still really slow shifts and no overdrive lock up. I tried the paper clip trip in the back of the FIPL plug and I get less than...
  14. M

    Continued fuel leak

    That was going to be my next question. The hose says fuel rated. Would I have to go to a special place to get "diesel rated" hose?
  15. M

    Continued fuel leak

    The return lines and caps were replaced last July, do you think that I need to do them again? The valley pan is dry. This fuel leak is a complete mystery. I think I am going to get some florescent fluid to put in the fuel to trace the leak.
See more

Latest posts

Forum statistics

Threads
91,334
Posts
1,130,565
Members
24,139
Latest member
440wagon

Staff online

Members online

Total: 813 (members: 12, guests: 801)

Share this page

Top