Erratic Vacuum Cruise

Agnem

Using the Force!
Supporting Member
Joined
Jan 10, 2005
Posts
17,067
Reaction score
374
Location
Delta, PA
I seem to be developing a problem with the cruise control getting eratic on the Moosestang. It will pur along on a flat, and suddenly accerate or decelerate about 5mph, and then return with no ryme or reason. I suspect the VSS may be going bad. Can anybody confirm this? This would be the system used from 80 to 91.
 

jauguston

Retired
Joined
Aug 16, 2005
Posts
303
Reaction score
0
Location
Bellingham, WA
Mel,

You might want to see if you can lube the pull cable for the throttle. A lube like bike cable lube that is graphite and very thin run down the cable might help if the cable is sticky. Also check for kinks or sharp bends.

Jim
 

Roland_Jenkins

Señor Member
Joined
Jan 18, 2004
Posts
2,598
Reaction score
0
Location
Nevada
VSS = Vehicle Speed Signal

I would start by checking the lines for leaks. A hand held vacuum pump will make that a lot easier.
 
Top