Dynamic Timing Meter

[RacingSTude]

I have a Kent-Moore Tach-N-Time, Model # J33300-A, Diesel Timing Set. It includes the User Guide, the magnetic pickup for the harmonic balancer, the line clamp for pulse timing and all the harnesses necessary to connect the unit for timing a diesel. One more outstanding feature, you can use your own inductive timing light with this unit!

The whole outfit looks unused, with no apparent wear to any of the electrical components. In fact, look close, it looks like the clamps that connect to the vehicle's 12 volt battery have never been connected! This is the "A" model, the newest version of the J33300 timing units.

Gotta get $300.00 plus actual shipping cost. You can start a nice little business with your Kent-Moore J33300-A, it will pay for itself in no time! This unit brings in other business, because you'll probably be, (like me), the only fella in your county who can REALLY "tune" any/all light-truck diesels! Trust me, word gets around FAST!

I would also be interested in trading this outfit for a working SUN distributor tester.

Please send PM or email me if you're interested. Thank you.

 

[RacingSTude]

Added Pictures...

 

[FORDF250HDXLT]

i see that.
could you list all the parts along with their part numbers please.
for example only:
J 33300-10A LUMINOSITY PROBE 10MM X 1.0 THREAD

J 33300-20A MAGNETIC CRANKSHAFT PROBE

J 33300-30A LUMINOSITY PROBE HARNESS

J 33300-61 TRANSDUCER HARNESS

28027 1/4" CLAMP ON LINE TRANSDUCER


these are still made by the looks of it,along with all the parts.i should have just gone this route.
i'll see what ya got,and work through my current ebay mess,and see what happens.
thank you.
if i become interested here shortly,could you provide a video showing each method(if you have the lumy parts that is) using the meter on a truck?

 

[RacingSTude]

i see that.
could you list all the parts along with their part numbers please.
for example only:
J 33300-10A LUMINOSITY PROBE 10MM X 1.0 THREAD

J 33300-20A MAGNETIC CRANKSHAFT PROBE

J 33300-30A LUMINOSITY PROBE HARNESS

J 33300-61 TRANSDUCER HARNESS

28027 1/4" CLAMP ON LINE TRANSDUCER


these are still made by the looks of it,along with all the parts.i should have just gone this route.
i'll see what ya got,and work through my current ebay mess,and see what happens.
thank you.
if i become interested here shortly,could you provide a video showing each method(if you have the lumy parts that is) using the meter on a truck?

The basic set, (about $850.00), I'm selling includes the options,

J 33300-20A MAGNETIC CRANKSHAFT PROBE - About $350.00
28027 1/4" CLAMP ON LINE TRANSDUCER - About $245.00
J 33300-61 TRANSDUCER HARNESS - About $90.00

My unit also includes the comprehensive directions for timing a diesel. Basically, you have to know how to be able to move the IP to get the timing you want, the timing unit handles everything else. It's very easy. The three different methods of diesel timing that my unit can handle, in it's current configuration, should be more than adequate. This unit also gives you the option of using your own inductive type timing light. I understand that proper timing with a luminosity probe, (which replaces the number one glow plug), also requires a corrected cetane measurement, not worth the trouble....

 

[my85ford]

The basic set, (about $850.00), I'm selling includes the options,

J 33300-20A MAGNETIC CRANKSHAFT PROBE - About $350.00
28027 1/4" CLAMP ON LINE TRANSDUCER - About $245.00
J 33300-61 TRANSDUCER HARNESS - About $90.00

My unit also includes the comprehensive directions for timing a diesel. Basically, you have to know how to be able to move the IP to get the timing you want, the timing unit handles everything else. It's very easy. The three different methods of diesel timing that my unit can handle, in it's current configuration, should be more than adequate. This unit also gives you the option of using your own inductive type timing light. I understand that proper timing with a luminosity probe, (which replaces the number one glow plug), also requires a corrected cetane measurement, not worth the trouble....

Im very interested give me about a week and if you still have it Im pretty sure Ill get it! let me know if you sell it please thanks Jeff

 

[RacingSTude]

Sounds good to me. You can reach me directly at racingstude at pbtcomm dot net

 

[my85ford]

Sounds good to me. You can reach me directly at racingstude at pbtcomm dot net

Ok thank ill be in touch