Answer me this

mexicanjoe

Full Access Member
Joined
Aug 4, 2018
Posts
321
Reaction score
267
Location
texas
I started up ol' LuLuBelle yesterday when it was a balmy 98 degrees. I thought I would check the blowby, so i unscrewed the oilfiller cap. I then placed a rubber glove over the opening, and LO AND BEHOLD: the vacuum almost sucked the glove into the crankcase/oilfiller tube. My question is this: IS THIS NORMAL?
Did my toenail transplant go haywire, are my future grandchildren going to be born naked?? Inquiring minds want to know.!!! Will the brain trust please chime in???Gracias, su amigo: MEXICANJOE!!!
 

FrozenMerc

Full Access Member
Joined
Dec 21, 2018
Posts
457
Reaction score
788
Location
SW Missouri
At idle, it is not uncommon to build negative (vacuum) crankcase pressure. Shows everything is sealed up good.

6.7 Powerstrokes on our engine dyno will do the same. the dyno monitors crankcase pressure. The engine will generate a slight vacuum at idle, and that changes to a small amount of positive pressure as the rpms and the engine load builds up. Peak crankcase pressure occurs at WOT / Peak Torque, which makes sense as that is when cylinder pressure is the highest and the most amount of blow-by occurs.
 

Jesus Freak

Full Access Member
Joined
Apr 3, 2022
Posts
4,454
Reaction score
5,059
Location
Crestview, FL
Sounds like you're legit, Senor Joe! Your grandchildren will be born fully clothed in birthday suits.....all is well, siesta well......
 

david85

Full Access Member
Joined
Feb 21, 2008
Posts
4,953
Reaction score
1,244
Location
Campbell River, B.C.
Air filter?
^^This. Check the air filter. If it's restricted, it causes the intake to pull more vacuum than usual (for a diesel). If it's not restricted, then you have an unusually tight engine. Some small amount of blowby at idle is normal on these.
 

mexicanjoe

Full Access Member
Joined
Aug 4, 2018
Posts
321
Reaction score
267
Location
texas
OK, its off to Oreilly to get a fresh airfilter. I can say that adding canola oil to the fuel seems to help the tired old thing. I added a home made air airtube to help ingest some 103 degree west Texas air........Ive still got a ratting noise when the engine is running, and the clutch is not depressed. I believe now that the throwing bearing and throwout arm are not engaged properly.
My many thanks to my friends here. I understand ALL my future grand children will be born naked, my toenail transplant did not go as planned.. I did not reject the toenail, the toenail rejected me!!!! Further, I found out the sun will continue to rise in the East until further notice ;and I will not ever purchase a powerstroke V-8.!!!
 

Forum statistics

Threads
92,996
Posts
1,155,942
Members
26,575
Latest member
Gerhard

Members online

Top