I have a 1994 f350. It was originally a 7.3 powerstroke and a previous owner for some reason put in a 1983 6.9 idi. I installed a 1993 idi wiring harness, Ecm, and a newer injection pump drive gear housing with a tach sensor. When I fired the truck up it was reading 1500 at idle. The truck has...
How to set up a Reverse Shackle Kit
Tools Needed
Corded Drill, as it will put up with the abuse of lots of drilling and a reamer
7/8’’ reamer. Trust me it’s worth it to spend the money on it versus buying a harbor freight step bit.
Air hammer and chisel bit
Plumb bob, in a pinch a piece...
Hello, I have a 1987 Ford F-250 with the 6.9idi engine. The truck hasn't ran in over a year. I replaced the fuel filter and then ran a temporary fuel line from a clean fuel source and primed the system. The fuel filter housing I'd purged of all air and the injection pump has pushed fuel to all...
I have a 1983 6.9 idi that won’t start anymore. The I’ve narrowed down the cause with all the troubleshooting I know.
This all started when I was testing the 4x4 after I bought it. I drove through what I thought was a puddle and ended up being a 5 foot pond. Engine hydro locked. I dropped the...
MY rear fuel tank sending unit seems to be shot, front works great. I have been reading the forums and it looked like nobody was making sending units for the 6.9idi. When I checked jc whitney I found this...
I came across this site and found a lot of general information I think a lot of you already know but with new guys on the forums all the time this is a great site for a quick read, or look up of info.
http://www.dieselhub.com/idi/idi.html
Enjoy!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.