Search results

  1. CADHOWDY

    How to set up a Reverse Shackle Kit

    Awesome write up. Like a instruction manual but with experience added.
  2. CADHOWDY

    EBAY TURBO BUILD

    https://www.ford-trucks.com/forums/1711911-where-to-buy-6-9-idi-piston-rings.html Here is the piston ring link. Just a post from me in the thread.
  3. CADHOWDY

    EBAY TURBO BUILD

    https://www.ford-trucks.com/forums/1711970-6-9idi-best-glowplus.html More detailed info on my piston ring situation.
  4. CADHOWDY

    EBAY TURBO BUILD

    I will get some pictures up soon but a little update on the build. The truck is together and I am driving now but I have forgone the turbo and intercooler for now and am running it NA. I have gained some consistency in it's operation and running characteristics and a few thoughts and notes on...
  5. CADHOWDY

    EBAY TURBO BUILD

    Thanks for the prompting. I do have an update and yes the engine is built and in running order as well as mated to my ZF5 and sitting in the truck. I don't currently have a picture of that yet but I plan to soon be working on the truck and getting it back together. Rebuilt 6.9 IDI Diesel...
  6. CADHOWDY

    Rotomaster

    Just a link to more info on these off brand turbo setups. https://www.oilburners.net/threads/what-is-this-turbo-setup.90459/#post-1091326
  7. CADHOWDY

    Name that TURBO!!!

    I have this very set up from a parts truck. This is a link for other info and pictures that I found. https://www.oilburners.net/threads/rotomaster.39084/post-1051719 I haven’t updated in a little while but this link is my build using this turbo setup...
  8. CADHOWDY

    1984 F250 Dana 60 Swap

    WHEN I DID MY SAS, MY AXLE CAME WITH EVERYTHING EXCEPT THE CALIPERS. WHEN I INTIALLY INSTALLED THE AXLE I DIDN'T PUT THE TRACK BAR IN AND I WOULD GET DW WHEN I HIT BUMPS ON THE HIGHWAY. THAT WAS UNTILL I INSTALLED THE TRACK BAR WITH NEW BUSHINGS. EVERYTHING BOLTED UP IN WITH NO FITTMENT ISSUES...
  9. CADHOWDY

    EBAY TURBO BUILD

    SO THE WAY I HAVE THE TURBO REPOSTIONED IT WILL BE EASIER TO CLEAR EVERYTHING AND SEND IT DOWN THE STOCK LOCTION BETWEEN THE BELL HOUSING AND FIREWALL.
  10. CADHOWDY

    EBAY TURBO BUILD

    IT WOULD BE EASIER TO SAY WHAT IT DID COME WITH. - VALLEY PAN/ INTAKE GASKET - VALVE COVER GASKET - WATER NECK GASKET - VARIUOS ORINGS - INCOMPLETE NUMBER OF VALVE SEALS - INSTRUCTIONS - SET OF HEAD GASKETS AND RATHER FOURTUNATLY IT CAME WITH A PLUG FOR THE CDR HOLE IN THE VALLEY PAN AS I WILL...
  11. CADHOWDY

    NAPA Echlin Ignition vs Motorcraft Glow plug relay comparison - with pics

    I GET THAT THE NAPA SOLENOID MAY NOT BE BUILT WITH AS GOOD OF PARTS. MY QUESTION IS DOES IT OPERATE LIKE AN OEM UNIT AS FAR AS FUNCTION GOES? I HAVE HEARD THAT OTHER GLOW PLUG CONTROLERS WON'T FUCTION QUITE RIGHT AND HEAT FOR THE PROPER AMOUNT OF TIME ETC. I WILL BE USING MOTORCRAFT GLOW PLUGS.
  12. CADHOWDY

    EBAY TURBO BUILD

    So some time has passed and there has been progress. I have got my block and rotating assembly back from the machinist as previously my problem was finding a set of piston rings for my .040 over pistons which now has been remedied. The compression rings are the regular 5/32 rings found...
  13. CADHOWDY

    93 7.3 idi locked up driving down the road

    I tore apart a 7.3 not to long ago that was seized solid. We actually sheared all of the fly wheel bolts trying to turn the engine over with the clutch. It turned out that it had dropped a valve, cracked the cylinder, demolished the piston, and the rod and pin was curled up underneath against...
  14. CADHOWDY

    OIL PAN MODIFICATION FOR COLD WEATHER STARTING

    Well part of what spurred this idea was a conversation with a customer who faced the breaker tripping problem while he was out on the rigs. He was unable to have both heaters plugged in because it would trip the breaker and mind you, at least one or two other people were usually plugged in at...
  15. CADHOWDY

    OIL PAN MODIFICATION FOR COLD WEATHER STARTING

    So I have an idea for a better cold start that could apply to other applications as well as a 6.9 and 7.3 IDI. Block heaters are generally a must if cold starts are below the -10C (14F) or so mark and there may be some opinion on whether it is better to have your heat in the cooling system or to...
  16. CADHOWDY

    What is this turbo setup

    Rotomaster turbo BAE manifold
  17. CADHOWDY

    I Need Piston Rings

    Well I had forgotten but I had phoned Northern Auto Parts about a ring set a while back and they were no longer available then. Still looking for any leads. I have considered going that route Booyah.
  18. CADHOWDY

    I Need Piston Rings

    I guess it just takes another set of eyes to take a look because I had tried to find these rings from these guys previously. Thanks for the Help riphip.
  19. CADHOWDY

    I Need Piston Rings

    So here is the scoop, I currently have a 6.9 block, heads, and rotating assembly ready to go from my machinist. (Build Thread; EBAY TURBO BUILD) The last pieces that I need are a set of .040 over size piston rings. We have been unable to source them from any of our suppliers and the...
  20. CADHOWDY

    EBAY TURBO BUILD

    I decided to do it differently and run the oil feed line off the crankshaft oil gallery. It seems to be an out of the way place to route it. The inter cooler is something meant for a Mitsubishi Eclipse I think. We’ll see how it does as far as hurting the efficiency of my radiator with all of...
  21. CADHOWDY

    EBAY TURBO BUILD

    What if I were to weld a sort of spine on the back of the elbow like 1/4" rod or something like 1/2 flat stock bent on the edge?
  22. CADHOWDY

    EBAY TURBO BUILD

    All of the planned machine work is done now and now we are trying to scratch together parts as they are proving more difficult than they should be to get. The last hurdle now is finding a 4.040 piston ring set with the international 7/64 oil ring.Seemingly Non existent unless someone here is...
  23. CADHOWDY

    EBAY TURBO BUILD

    I took the existing wiring harness of the ‘89 7.3, stripped out the glow plug wires and replaced them with new wires and routed everything to the new controller location on the dipstick support bracket. I think I will disable the controller function and go manual using the ribbon for the 6v glow...
  24. CADHOWDY

    Redneck 6.9 Rebuild (don't try this at home)

    I just stumbled onto this thread recently and also noticed you (bbjordan) are a fellow Albertan. I'm gonna take a guess and say the '86 is still running strong and I'm just curious about any new happenings with the project.
  25. CADHOWDY

    EBAY TURBO BUILD

    A bit of an update. I’m almost able to start the assembly on the engine. All of the machine work and balancing is complete with the crank polish being the last thing. The machinist said the the balancing was abhorrent. A 600 dollar job as apposed too 300-400 on a regular gas V8. The only thing...

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,759
Members
24,098
Latest member
William88

Members online

Total: 557 (members: 19, guests: 538)

Share this page

Top