Search results

  1. matt-jenkins

    92 Automatic Stalls when put into gear

    Hi Idle is working, just need to work on tracking down this air leak.
  2. matt-jenkins

    92 Automatic Stalls when put into gear

    Besides the Return Lines, where should I start looking to track down the air intrusion? Do I need to start from the tanks and go forward, or can I narrow it down and start from the lift pump or Filter head and go forward from there
  3. matt-jenkins

    92 Automatic Stalls when put into gear

    Would the FIPL code I'm getting cause the truck to stall? Only when first started, let the truck idle for 45 seconds before it goes into gear and It's all good. It also only does it when the truck has been sitting and cooled off, never when i shut down and start up within an hour.
  4. matt-jenkins

    92 Automatic Stalls when put into gear

    First thing in the morning my 92 will start fine and then stall after a few seconds of running, then start fine but takes a little throttle to keep running. It will also stall when put into gear when cold after starting. New Fuel Filter, New Injector on the passenger side. IP and the other 7...
  5. matt-jenkins

    Loss of power when driving

    Fuel pressure when measured off the Filter head should be between 4-7psi correct?
  6. matt-jenkins

    Loss of power when driving

    Possibly needs timing adjusted?
  7. matt-jenkins

    Vacuum Problem

    So last night when I was driving I noticed that intermittently I would have a normal feeling pedal and fully functioning breaks, it's almost like the new vac pump I have just takes a long time to build enough vacuum to fill the booster. It hasn't acted like this the few other times I have driven...
  8. matt-jenkins

    Vacuum Problems - No Power Brakes

    So last night when I was driving I noticed that intermittently I would have a normal feeling pedal and fully functioning breaks, it's almost like the new vac pump I have just takes a long time to build enough vacuum to fill the booster. It hasn't acted like this the few other times I have driven...
  9. matt-jenkins

    Vacuum Problem

    Any chance you could snap a picture of your push rod so I can make sure I have mine twisted the right way? Thanks.
  10. matt-jenkins

    Vacuum Problem

    Replaced the check valve when I did the booster and I also checked it on its own
  11. matt-jenkins

    Vacuum Problems - No Power Brakes

    Second question then, how do I know if I have RABSII or not?
  12. matt-jenkins

    Vacuum Problems - No Power Brakes

    I have replaced the check valve, and how do I get the abs/e brake light code?
  13. matt-jenkins

    Vacuum Problems - No Power Brakes

    The ABS light comes on intermittently and the e-brake light is almost always on
  14. matt-jenkins

    Vacuum Problem

    Hey guys sorry for not keeping up On my own thread but I have been getting a good amount of help from the Facebook Post I made however the issue still isn't resolved. I put a second reman booster on, new master fresh fluid and bled all 4 corners as well as the RABS modulator, still no...
  15. matt-jenkins

    Vacuum Problems - No Power Brakes

    Ok so here is an update I replaced the master and flushed the entire system with new brake fluid, no change I did install a second reman booster as the first reman I had wasn't building vacuum, still no change. I had good fluid pressure when I was bleeding, the truck doesn't pull at all...
  16. matt-jenkins

    Vacuum Problems - No Power Brakes

    Jacked up the rear end and the brakes work, I cannot find any leaks anywhere in the lines. Could It be the master cylinder? I'm really at loss of what my issue could be
  17. matt-jenkins

    Vacuum Problems - No Power Brakes

    I checked the lines and didn't find any leaks, I also plugged line from vacuum pump directly into the booster and still had no luck, what should my next course of action be?
  18. matt-jenkins

    Vacuum Problems - No Power Brakes

    Posted this today in the Powerstroke section but havnt gotten any replies and need help ASAP Friday I came to a stop and I got the classic Hard Pedal syndrome, I checked the vacuum line running across the top of the motor to the T on the drivers side fender well and had no suction. I replaced...
  19. matt-jenkins

    Vacuum Problem

    Friday I came to a stop and I got the classic Hard Pedal syndrome, I checked the vacuum line running across the top of the motor to the T on the drivers side fender well and had no suction. I replaced the Vacuum Pump and now have vacuum but no brakes. Next I pulled the Brake Booster and...
  20. matt-jenkins

    Diagnosing Driveline vibration/noise

    My U joints are the non greasable varity, Would bad U-Joints make the squeeling sound as Im driving? i assumed this was the support bearing because I didnt think bad U joints would make much noise once the truck was rolling.
  21. matt-jenkins

    Diagnosing Driveline vibration/noise

    Lately Ive noticed a vibration on take off that has turned into a tinging at low RPMs and sometimes a screetch at higher RPMs when the truck is loaded I.e. going up a hill or even just when i use heavy throttle. the U joints feel tight and the center support bearing has some play but it...
  22. matt-jenkins

    No Power when Key Cycled

    That cable looks fine but there is some yellow corrosion on the battery side of the cable. I think its battery related, when I checked the cable I once again popped the battery cables and after reinstalling them it started. Maybe one just worked its self loose? Fingers crossed thats all it is...
  23. matt-jenkins

    No Power when Key Cycled

    Today I got in my truck and turned the key, waited for the WTS light to turn off, when I twisted my key to engage the starter I lost all power, no lights on the dash, radio, motor didnt crank, nothing. I turned the key all the way back to the acc. position and the deck turned on as did the...
  24. matt-jenkins

    MPG

    1) Tires are only a year old so they will stay for at least another year till it is time to replace them. I use my truck in the bush quite a bit so having an aggressive tire helps, How does one reset the Odometer? 2) Transmission was built by the Original Owner before I bought it, When going...
  25. matt-jenkins

    MPG

    I've never gotten better then 14mpg on the highway running at 60mph. I have brand new BB codes, 5000km old IP, timing set to 9.5 degrees I would love to get over 400km (250mi) to my front tank, best i can ever seem to get is around 350.

Latest posts

Forum statistics

Threads
91,292
Posts
1,129,832
Members
24,106
Latest member
lewisstevey7

Members online

Total: 576 (members: 2, guests: 574)

Share this page

Top