Search results

  1. Kevin 007

    What's this in the oil pan?

  2. Kevin 007

    What's this in the oil pan?

    It's ferrous, but doesn't appear to be magnetic. I will check that again to be sure
  3. Kevin 007

    What's this in the oil pan?

    Ah! I bet you're right. The front cover was off of the engine years ago, so it would have been disturbed. I'll compare with a parts engine
  4. Kevin 007

    What's this in the oil pan?

    Just confirmed that it's smaller in diameter than the locating dowel for the IP drive
  5. Kevin 007

    What's this in the oil pan?

    That's what I first thought
  6. Kevin 007

    What's this in the oil pan?

    Found in the bottom of the oil pan while doing an oil change. 92 E350, N/A, runs good. No noises. Lifter parts? The mech fuel pump has been deleted and blocked off, so not from that.
  7. Kevin 007

    Could Someone Explain How These Valve Stem Seals Are Supposed to work

    I don't run positives on the exhaust. Minimal oil consumption. These guides need all the lube they can get
  8. Kevin 007

    17 years later I did a compression test

    465. Don't see that everyday
  9. Kevin 007

    94 idit idles rough when warm

    Do you know how many miles are on the injection pump? They don't last forever and can do strange things as they wear out. And injection pump timing, do you know where it's set at? I would start with these 2 things.
  10. Kevin 007

    Engine stand

    It works good. Simple and cheap.
  11. Kevin 007

    Engine stand

    One of mine is a crude cut-away of an engine cross member, welded to some truck frame. Doesn't allow for spinning however, but it's an example of something that it can sit on, other than a conventional stand. Doesn't allow for removal of the oil pan, unless you modify the section of...
  12. Kevin 007

    Valve Stem Seals

    No notable increase in oil consumption running no ex valves seals in the most recent 6.9 I put together. A bit of blue smoke for a few seconds on acceleration after long periods of deceleration (down a mountain pass or something) or long periods of idling. Might be coming from the lack of...
  13. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Yup, 2000+ for sure. I can reach max by 2500 id say. Seems to flat line after that, at least with the level of fuel it's getting. With my driving style, im never really over 2500.
  14. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Ah the great part about vans, the access the doghouse allows for!
  15. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Gave it a shot. It helped a bit. It's at approx 6.5 degrees now. Boost begins to build a bit sooner, but no drastic change. no change in max boost. Knocked the smoke back a bit of course. No complaints. I think I will leave it here. I don't really care to see big boost numbers, 9-10 is...
  16. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    I'll give that a shot and will report back
  17. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Well it's installed and in service. I honestly cannot tell the difference in performance going from the factory convoluted up pipes to this short, custom 093 style up pipe. It's making 9lbs max at high 2000's rpm's, 1.5-2lbs cruising at 1600rpms and doesn't really start building anything more...
  18. Kevin 007

    Rebuilt engine maintenance

    Yup, i'm all about re-torquing head bolts as preventative maint. They're always pretty loose if they've never been touched before. I've never blown a head gasket on an idi, with this practice and of course driving them as a slow old diesel is intended on being driven.
  19. Kevin 007

    6.9 & 7.3 idi electric fan clutch conversion

    Probably would have been 230+ before I bet!
  20. Kevin 007

    6.9 & 7.3 idi electric fan clutch conversion

    Installing mine right now. Haven't put it to the test yet, but all the components are quality made and installation is straight forward. Looking forward to using it
  21. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Indeed. I've always like that and the simplicity about the 1st gen, non gated Banks turbos. Which was the main reason I decided to use it.
  22. Kevin 007

    Hybrid factory turbo collector to Banks turbo, ideas please.

    Well I got something put together here. Not the prettiest, totally custom with what I had, but it's leak free so far. Should have this thing installed later this week and I will report back with results.
  23. Kevin 007

    Axle Flange Gaskets - Do You Use ?

    If I have some, i'll use them. But ended up using RTV more times over using a gasket, due to unexpected need to pull axles, without having new gaskets on hand first. Never had an issue either way.
  24. Kevin 007

    6.9 & 7.3 idi electric fan clutch conversion

    Good move!!!!!
  25. Kevin 007

    6.9 fuel economy after turbo add and fuel screw increase

    Yes, under towing or high altitude situations, that's when you'll see a bit of an improvement in MPG with a turbo compared to N/A, but day to day putting around you won't notice much.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 898 (members: 3, guests: 895)

Share this page

Top