Search results

  1. yARIC008

    Econoline battery group 65 "conversion"?

    Stock is not group 31. Group 31 is a much larger battery. The optima group 31 though is narrower than a normal group 31 due to the offset spiracells therefore fits.
  2. yARIC008

    Econoline battery group 65 "conversion"?

    Optima Group 31 fits on the passenger side.
  3. yARIC008

    Marinized 7.3 IDIT

    Needs head gaskets probably actually means the block is cavitated through.
  4. yARIC008

    Fuel Gauge pegged - where to start looking

    When my connector to the tank was not pushed all the way together, aka open circuit, my fuel gauge was off the chart full all the time.
  5. yARIC008

    I present the 400,000 mile PSOM/Odometer

    It just goes to 300,000. Nothing special. There is a video or two floating around somewhere of it.
  6. yARIC008

    Fuel Gauge pegged - where to start looking

    Do you know if you have an anti slosh module in the instrument cluster. I think they can cause the fuel guage to peg when bad. My fuel guage was pegged for a while from me not pushing a connector fully together at the tank from the sender after I worked on it. Could try to locate that...
  7. yARIC008

    I present the 400,000 mile PSOM/Odometer

    They sell new clear lenses for pretty cheap...
  8. yARIC008

    Van Restoration Project

    I actually ended up donating the turbo to a friend of mine and he used it on a project truck a while back. I am kind of getting worried about parts and such, these things are getting old and it's going to be harder and harder to find stuff.
  9. yARIC008

    E4OD won't move from stop in D

    Never heard of this problem. Could it be the torque converter somehow? Does the fluid look and smell ok?
  10. yARIC008

    I present the 400,000 mile PSOM/Odometer

    I think the 87-91 rolled over at 99,999 miles, the 92-96 roll over at 399,999 miles, and the 97+ I'm not sure where it tops out.
  11. yARIC008

    I present the 400,000 mile PSOM/Odometer

    So... everyone said it couldn't be done. But, the van was about to roll over to 400,000 miles and I didn't want to roll back from 399,999 back to 300,000 and be a lame-o. So I figured out a way to get it to show 4xx,***. It's really just a cheat, but took a little doing and looks pretty...
  12. yARIC008

    Wally the Walrus (1992 E350 High Roof/Ext. Body)

    That instrument cluster you found will work in the van. I have one rigged up. If you need some help I can try to advise. To get the tach to work you need to run a wire to the tranny computer. It has the output but no connector or wire to connect to it. You also need to reorder the wires on...
  13. yARIC008

    Van Restoration Project

    So did a fun little upgrade today. The lighting in the back of the van had been lacking and I realized about a year ago some vans came with courtesy lights in the rear. Even though this was an custom ordered XLT it somehow wasn't included. This van is one of the first few off the assembly...
  14. yARIC008

    7.3 idi throttle position sensor question

    https://www.ebay.com/itm/284981547208?hash=item425a3950c8:g:LeEAAOSwkHljMjjj&amdata=enc%3AAQAHAAAA4APnmZNZ9bm7KTPXqIjbvHVIgpAwkX74P9PTR13sUBI6G450VK9fpy0oFwq61SF6Mxv6D%2B9b0BI7Cz16vkoyRK5ZiYK3tjQBIRS0nYb%2Fqz%2FdJNfTV9NQv%2FAmJGioqSOsXq1N68RENwdRBihIpEx5Eq%2BXas0y3TOdmS%2BY2482VJ3LZFbZqfeMdsdLKHV...
  15. yARIC008

    7.3 IDI replacement dipstick tube -E-350 van

    Actually, this one will probably work too and says Engine oil. Just cut to length...
  16. yARIC008

    7.3 IDI replacement dipstick tube -E-350 van

    Maybe just get another transmission dipstick and cut it to the proper length. The tranny ones are much thinner and will probably not bind up as easily.
  17. yARIC008

    ORing on dipstick tube &valve cover gaskets on ‘94 IDIT engine

    Man, you got a lot of leaks going on. I used cork gaskets a long time ago and hated them. I only use RTV or rubber now. Mostly just rubber with RTV slathered all over it. I know from the factory they sealed the oil pan to the engine with only a ton of RTV, no gasket. If you end up needing...
  18. yARIC008

    Van Restoration Project

    So been forever since I've updated this. I noticed I never showed a final picture of my wiring. I'll have to go take one and post it. The wiring job took months to complete and then I never showed the final product and how it's all labeled and organized under the sill plate. This weekend I...
  19. yARIC008

    Truck stalls between shifting

    I believe this is the metering valve sticking from lack of lubrication. Fuel additive should fix it. You should always run additive as modern diesel fuel lacks the Sulphur that these injection pumps were built to use as lubricant.
  20. yARIC008

    Radiator beat down

    I have the champion 4 row, after 4 years to sprung a leak. However, the customer service was exceptional. One call and 2 minutes in they had a new one shipping to me. I just replaced it yesterday actually.
  21. yARIC008

    Electrical Gremlin

    Ah, the one thing that is easier to work on with the van, lol.
  22. yARIC008

    Coolant / SCA test strip question..

    Get the strips that test the combo which I believe fleetguard makes, you can get on amazon. Napacool stuff only uses one of the chemicals and not both, pretty sure I talk about it in the cavitation article. If I’m not mistaken, if the coolant is not green that basically means its an ELC which...
  23. yARIC008

    Coolant

    I am running 7 psi now too. I had extra thick liners installed and keep scas up so hoping I’m okay. Its not a daily driver now so if she blows up again it’ll be my opportunity to take it all apart and fix alot if things.
  24. yARIC008

    Electrical Gremlin

    Didn’t completely follow your write up... But if you’re using a manual button then the controller is doing nothing. You’re just controlling the relay.

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Top