Search results

  1. nightrunner84

    My arduino gauge project

    OK, I've built one of the filters. It works! Now to build some more, and get the sensors. Thanks for the filter design!
  2. nightrunner84

    My arduino gauge project

    Well, shoot. I plugged in a NTC type sensor, and the all went to -40. The resistance was checked against a resistance table, and made sense (8.3k for around 85 degrees F). I doesn't matter which pin I put it on (A0-A3), all the fields change to the displayed picture below. I'm using the 5V pin...
  3. nightrunner84

    My arduino gauge project

    Alright! Up and running! I ran the script you gave me, it gave me 0x3F. Changed the address from 0x27 to 0x3F. Thank you for the time spent on figuring this out. I couldn't have done it without your help.
  4. nightrunner84

    My arduino gauge project

    I'll try it when I get back home. Thanks!
  5. nightrunner84

    My arduino gauge project

    Thanks! It compiled and uploaded. I've got data in the serial monitor now. The display is still inop, but maybe I got a bad screen. Let me check on a couple of things...... Thank you! I showed some people at Christmas what you're doing, they thought it was really cool.
  6. nightrunner84

    My arduino gauge project

    That worked! It compiles and uploads now. The display isn't working. Looks a little different than the one in your picture, but i think that may be because its newer? I bought it two days ago. Its hooked up right, I think. This is the Amazon page I bought it from...
  7. nightrunner84

    My arduino gauge project

    OK, I've got the circuit built, and I'm trying to compile and download the code. I keep getting " 'NEGATIVE' was not declared in this scope ". I think I have the wrong Liquid_Crystal_I2C.h library. Did you have this problem? It seems to compile otherwise. Also, I noticed that you're using two...
  8. nightrunner84

    My arduino gauge project

    Thank you for the code, and the sensor ID's. I have a R3 that I'm using now, You're using a nano? Is this it? https://www.amazon.com/Arduino-A000005-ARDUINO-Nano/dp/B0097AU5OU It has two more analog inputs than mine, and it's CHEAP! I'm sorry to ask again, but do you have the STL file for...
  9. nightrunner84

    My arduino gauge project

    I'd like to make the same display the you put in the left side of the dash. I think that was a 20x4, right? Extrapolating the data can be done, I remember enough from my microprocessor class to adapt your code to what I need. What I don't remember, is the commands to display and format the...
  10. nightrunner84

    My arduino gauge project

    This is an awesome project! Does anyone have the STL files, or the Arduino code? I'd like to add multiple gauges, and this would keep the dash really clean.
  11. nightrunner84

    Lock-up converter help

    Is this the one I need? https://www.amazon.com/dp/B07RLSS4FJ/ref=cm_sw_r_other_apa_i_0tEPDbEHJVFHN
  12. nightrunner84

    Lock-up converter help

    Ok, got the right wire. However, during lock-up, it drops the rpm by about 500, but as soon as I accelerate, it's got about 200rpm of slip. Does this mean I need a new converter?
  13. nightrunner84

    Lock-up converter help

    I read that as going to the coast solenoid. Am I reading the diagram wrong?
  14. nightrunner84

    Lock-up converter help

    Here's the diagram.
  15. nightrunner84

    Lock-up converter help

    I recently got a 92 crew cab, turbo 7.3. Having trouble getting the converter to lock up. Found the write-ups in this forum and made the mod, but it won't lock up. The wire colors were different, ended up slicing the brown and orange wire. It's taking .6 amps, but doesn't lock up. Here is the...
  16. nightrunner84

    Centurion Engine Build Thread

    This is all I've got done in the past month. Rolled it over to put the pan on, and rechecked the torque on the caps and rods. The caps were fine, but the rods all turned a bout a 1/8 to 55 ft/lbs. I putting the rear cover on now, and driving the main seal in. Is the Fel-Pro seal fine, or would...
  17. nightrunner84

    Centurion Engine Build Thread

    It's powder coated. I "think" it"ll be OK. I've done interior engine parts in the past with this coating and it's been OK, but I've never done behind a water pump. Just assumed it wouldn't be a problem.
  18. nightrunner84

    Centurion Engine Build Thread

    Got some more work done tonight. The valley pan, intake, IP, injectors, lines, front cover, valve covers, and return lines are on. I know the marks don't line up on the can gear, I put it the way the instructions said from IDI Performance. Let me know if you guys see anything I'm doing wrong.
  19. nightrunner84

    Centurion Engine Build Thread

    OK, the one that faces up at the rear of the block? It's 1/4 alright. Would Jasper have punched it out larger if it was a core? Also, I thought I read somewhere that the oil cooler passages in the turbo engines were different. Anyway, I got the cam changed, lifters, pushrods, exhaust manifolds...
  20. nightrunner84

    Centurion Engine Build Thread

    I've been putting together this 7.3 turbo engine for a Centurion that a bought a few years ago. The covers are at the powder coater, And I'm changing the cam with one from IDI performance. A few questions. 1. It's a Jasper engine, and the numbers are ground off next to the injection pump...
  21. nightrunner84

    Need help Identifying a block please.

    Thank you. I'll look at that in the next few days. I did notice that it has the correct pistons, oil cooler, and exhaust valves.
  22. nightrunner84

    Need help Identifying a block please.

    I bought a Centurion a few months ago with the intention of building the motor for it. I'm concerned that this isn't a factory turbo block. It did have a Jasper engine in it. Here's a picture of the casting number. Can you guys tell me what it is?
  23. nightrunner84

    WTB Crew Cab

    I've seen the pictures, is that a Centurion? Four Speed? Turbo? When would it be available to be sold?
  24. nightrunner84

    WTB Crew Cab

    I was hoping for something a little closer, but for the right truck, I'll travel. Do you have any pics? Two wheel is fine. I'm trying to tow my fifth wheel, and I can't fit everyone in the extended cab.
  25. nightrunner84

    WTB Crew Cab

    Wow, that is nice, and ideal for what I want. But 12K? Wish I had the money.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 895 (members: 1, guests: 894)

Share this page

Top