Search results

  1. notenuftime

    Brake trouble

    Replaced everything, think I just realized my screw up, didn't compress the cylinders before putting brake pads on.
  2. notenuftime

    Brake trouble

    The only thing that threw me was on the back of the caliper there is a clip that holds the pads apart, haven't seen this before. Is it there to help with putting on the brakes then removed once there on. Her is a pic of what mean.
  3. notenuftime

    Brake trouble

    I don't know what could be happening, job went smooth. The brakes are definitely rubbing tho.
  4. notenuftime

    Brake trouble

    Just put on new brakes, calipers and rotors in the front end. While driving i have alot of grinding going on, is there a brake in peroid when doing this job?, or did i do something wrong.
  5. notenuftime

    Torque specs dana 50 hub.

    I figured it was something like that when i was looking at the hub for the first time, I'm still going to give it a little more lbs just to be safe. When i first did my wheel bearings a couple months ago i torqued the nuts to 50 and 65lbs and ran like that till now. It may not be spec but i was...
  6. notenuftime

    Torque specs dana 50 hub.

    Looks like I'll go ahead and crank it down some more haha.
  7. notenuftime

    Torque specs dana 50 hub.

    That seems like alot of torque for outer nut, i went 50lbs for inner 65lbs for outer, thats what i ended up reading the most. No play in hub.
  8. notenuftime

    Torque specs dana 50 hub.

    Any one have correct torque specs for the inner and outer hub nuts. If i can remember 50lbs inner then back off quarter turn, outer somthing around 100lbs. Not sure on these, need verification thanks.
  9. notenuftime

    Upper steering column rebuild, need help.

    i have the upper column housing on the shaft but can't seem to get the bolts that connects to the lower housing on either side to line up. Was told to not tighten them till the inner bearing is fully seated, how do i know if seated. Any one do this job? Is there a trick to it.
  10. notenuftime

    Fuel tank selector valve.

    Was wondering if anyone has cleaned and or opened up the tank selector valve?. If so how should I do it, i have a spare valve i pulled off my parts truck looks a bit dirty and would like to clean it before i swap it with my current one, won't let me select front tank. I found these parts to be...
  11. notenuftime

    Oil filters

    I usually run Hastings filters. I see a conversation like this one start often over one product being better than another and in some cases there is a major difference. With auto parts i see this debate never ending, i don't know how much I can get worked up about brands when they are either...
  12. notenuftime

    Oil filters

    Going to pick them up now, these filters will hold a extra quart right?. So I'm looking at a 12 quart oil change.
  13. notenuftime

    Oil filters

    Any one know if any of these filters fit are trucks, on discount.
  14. notenuftime

    Replacing bearings

    Replacing some bearings in my front end got a Dana 50 anyone know which style of hub socket I need
  15. notenuftime

    Running rough

    Had the same thing happen to me with the sudden acceleration and chocking out ended up being the tank switch mounted on the frame wasn't letting fuel in not enough that is
  16. notenuftime

    Running rough

    Had the same issue ended up being the tank switch was going bad not letting fuel in
  17. notenuftime

    Factory Turbo Removal

    What he said no need to remove just need a adjustable socket to reach that one plug under turbo
  18. notenuftime

    tank selector switch test?.

    Salvaged a tank selector switch the one mounted on the frame from another truck, not sure if it works or not but was free any one know a way to test one of these to see if it works besides hooking it all up to the truck. My switch went bad wont select front would sure like to know if the...
  19. notenuftime

    Oil pressure gauge.

    Yes suspected something like that will be the first thing I look for
  20. notenuftime

    Oil pressure gauge.

    Goes to low side then moved around from there
  21. notenuftime

    Oil pressure gauge.

    Recently my oil pressure gauge started jumping around high then back down. So I replaced my pressure sensor but got the same result back and forth as I drive around. I have heard that our pressure gauge is not to be trusted to begin with. Maybe I need a after market gauge. Wiring issue any one...
  22. notenuftime

    Steering wheel noise

    Got it thanks
  23. notenuftime

    Steering wheel noise

    I'll check it out. are there kits you know of for rebuild.
  24. notenuftime

    Steering wheel noise

    How big of job am I looking at.
  25. notenuftime

    Steering wheel noise

    The passed couple times I have taken a drive I'm starting to hear a noise coming from just behind the steering wheel sounds like a spring with tension on it creeking. Some times makes turning hard like I hit little spots of resistance as the wheel clicks away. Any one have this before.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 829 (members: 2, guests: 827)

Share this page

Top