Search results

  1. jrollf

    Towing capacity 94 F350 crewcab dually idit

    Tongue pull 10k, 5th wheel 10 to 14k depending on options. Not uncommon to hit Max payload or GCVW before hitting Max 5th wheel weight. (5th wheel/gooseneck have higher tongue weight) Can you pull more? yes, is it safe... maybe not, a lot more goes into weight ratings than just horsepower...
  2. jrollf

    Pulse Timing Adapter

    Thanks! 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  3. jrollf

    Pulse Timing Adapter

    Is the 1/4 in id, 3/8 in od the correct size clamp? 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  4. jrollf

    7.3 return line caps

    If you want to get rid of the Caps, R&D has billet fuel rail replacements. http://www.idiperformance.com/store/p85/Billet_Injector_Fuel_Return_Rails_.html 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  5. jrollf

    Parking Brake Cable Replacement- And maybe a cure for your weak parking brake.

    There really isn't a 'place' for it. They plastic piece jams in-between two parts preventing the tensioner from operating. I found out I had one when a mysterious broken piece of plastic appeared on my floor board. Someone on the forum identified what it was from a pic I posted. FYI Ford...
  6. jrollf

    '93 F-250 Dually: Pre-King Ranch "King Ranch"?

    My step dad had a 'F250 super cab dually', mid to late 80s model. I seem to remember there was a time period you could only get regular cab or crew cab duallys, so if you wanted a super cab dually they had to be custom built. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder...
  7. jrollf

    Pulse Timing Adapter

    Hi all, I'm looking for a pulse timing adapter so I can set the timing after I replace the IP. Will this work? https://www.ebay.com/itm/Gunson-77089-Diesel-Adaptor-For-Timing-Lights/281589394900?epid=1443570632&hash=item4190092dd4:g:kSgAAOSwG9Fbzdsu Other suggestions? Seems like all the...
  8. jrollf

    Fuel tank sludge?

    If you can get it, run a couple tanks of B100 (100 % biodiesel). It like Drano for the fuel system, cleans it right out. Make sure you are carrying a couple extra fuel filters, it's likely going to get clogged and strand you as the B100 breaks all the gunk loose. Word of caution, if your fuel...
  9. jrollf

    OBS cruise control quit

    If the switch shows signs of leaking, it has to be replaced under the recall along with the addition of the fuse. If no apparent leaking they just add the fuse. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  10. jrollf

    "Tank" my 91 Crew Cab Dually

    Same part broke on my truck a couple years after replacing the radius arm bushings, hoping the new one last longer. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  11. jrollf

    Drone nose?

    Dynamat it is! I knew the flywheel and pressure plate always spin. I've heard of the rollover noise before but not much about increasing harmonics due to the smf. Thanks! 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  12. jrollf

    Drone nose?

    So I would get the noise even in neutral with the clutch pedal pressed down? 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  13. jrollf

    Drone nose?

    I'm getting a somewhat loud 'droning' noise that can be heard throughout the rpm range but most noticable at idle. Kind of sounds like an open intake plenum, like the airfilter was missing but louder. I also seem to feel a vibration and maybe a cylinder miss at slightly elevated RPMs in...
  14. jrollf

    So what did you do with your truck today?

    Lol, I remember my grandfather's Bronco had a 8 track under the dash. I still remember the thunk-thunk when changes tracks. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  15. jrollf

    LED Bulbs

    I've been running LEDs for a few years now. I like the look and brightness but have to admit, even using 'high quality' LEDs, the failure rate is much higher than the 'old fashioned' incandescent bulbs they replaced. Annoyingly when they fail one or more LED chips usually start flashing...
  16. jrollf

    Quick flywheel questions...

    Got the transmission in, overall not a hard job... except getting the transmission to slide back in place, probably spent a good 45 minutes jiggling, pushing, and pulling before it decided to pop in place. I have a few more trim pieces and some odds and ends to clean up then I will take it for...
  17. jrollf

    Quick flywheel questions...

    I do use a cordless driver drill with a socket adapter to run the bolts in quickly. There's no risk that the driver drill will over torque the bolts... makes it easy. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  18. jrollf

    Quick flywheel questions...

    Agree, hand torque all the way around! 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  19. jrollf

    Brake parts no-no's

    The RABS valve can be finicky and if you're not patient a real pain to bleed. Many forget they need to bleed the RABS after changing brake fluid and have issues with their brakes. Many bypass it to get rid of the maintenance headaches. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks...
  20. jrollf

    Are Bilstein shocks the best?

    True, but I can't seem to find anything but Gabriel and Monroe shocks for these old trucks anyways. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  21. jrollf

    Quick flywheel questions...

    My DMF is pretty much done. so I'm installing a new Valeo SMF. My old DMF flywheel had this ring spacer to distribute the loads of the bolts but I did not get one with the new flywheel. Does the new SMF flywheel not need one or should I use the ring off my old DMF? Also my new flywheel bolts...
  22. jrollf

    Power Driven Diesel Oil?

    Thanks Thewespaul, I was surfing on my phone and just realized I got my websites mixed up! I saw, what I now realize was your post about this oil earlier today in another tread on this forum (https://www.oilburners.net/threads/best-oil.86125/#post-1031908). For some reason I thought I was on...
  23. jrollf

    Power Driven Diesel Oil?

    Anyone try engine oil from Power Diesel? https://powerdrivendiesel.com/product-category/power-driven-fluids/convetional-oil/ https://powerdrivendiesel.com/product-category/power-driven-fluids/synthetic-oil/ Claims to be much higher in ZDDP and detergent (calcium) than the modern CJ+ and CK+...
  24. jrollf

    So what did you do with your truck today?

    Careful... going to end up with a full frame off restoration! :) 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual
  25. jrollf

    Turbo Boost and highway speeds.

    Sounds like a similar location to the Banks. Exhaust gases cool off some by the time they reach the manifold, I would suggest not exceeding 1k. Keeping EGTs down is all about not burning the exhaust valves. 1993 F350 Crew Cab Dually XLT 7.3 Factory IDIT w/Banks Sidewinder 5spd Manual

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 820 (members: 1, guests: 819)

Share this page

Top