Search results

  1. 9

    Transmission issues- rumble strip & hunting OD

    So I’ve gotta say thanks for all the input. Just to be clear, I can swap the 94 f-superduty set up into my truck as long as I have the drive shaft and all of the pieces? He said he’s got everything for a full bolt in set up. I’m thinking this would be the ultimate set up for longevity. I’m...
  2. 9

    Transmission issues- rumble strip & hunting OD

    The guy has the short driveshaft as well if that makes any difference. He does mention the brake on the transmission..so if I had all the pieces and the computer I’d think it would just bolt on?
  3. 9

    Transmission issues- rumble strip & hunting OD

    Hey here’s a thought..there is a zf5 complete set up for sale about an hour from my place. It’s from a 94 f-super duty 4x4 with 88k on it. The guy said he has everything for a swap. Asking $1600 Anyone want to give some pros and cons to this?
  4. 9

    Transmission issues- rumble strip & hunting OD

    Do you know if the 4r100 would Bolt on? Any idea on rebuild costs
  5. 9

    Transmission issues- rumble strip & hunting OD

    I did a bit of reading and it seems like solenoids need to be changed. I’ll calls a trans place tomorrow
  6. 9

    Transmission issues- rumble strip & hunting OD

    While I was down there I noticed a little bit of coolant dripping from around the starter? Don’t tell me that can just be heads or something?
  7. 9

    Transmission issues- rumble strip & hunting OD

    I just drained some fluid! It’s all metallic looking! So I found a 60k take out that was gone through in 2016. Asking $750 Or there is some super beefy monster brand transmission (never heard of) high hp rating in the crate for $2250..guy said it doesn’t fit his f100 Both are e4od and the...
  8. 9

    Transmission issues- rumble strip & hunting OD

    So I’ll jump the plug with a wire and get the codes tomorrow.. What about my fipl readings? 1.08 idle doesn’t seem to off
  9. 9

    Transmission issues- rumble strip & hunting OD

    I just took the readings from the fipl at idle setting I’m getting 1.08 and full throttle 3.8 I’m not sure if I’m supposed to have anything else unplugged (high idle-not sure I have that) and that’s key on ignition off
  10. 9

    Transmission issues- rumble strip & hunting OD

    So I looked it up and I’m seeing that there is a test port and you jump the wires and the check engine light blinks. Is that all I need here or do I need some obd1 reader?
  11. 9

    Transmission issues- rumble strip & hunting OD

    Just to be clear the od light isn’t flashing.. I changed the filter and fluid last January and maybe have 10k on it
  12. 9

    Transmission issues- rumble strip & hunting OD

    You can check fault codes on these old geezers? Ill look up on adjusting the fipl Thanks
  13. 9

    Transmission issues- rumble strip & hunting OD

    So I’ve been driving my truck for about a year since my motor swap. I’ve towed a fair bit when I do use the truck but recently I had a tool trailer on that was maybe 9k…first thing I’ve noticed is at higher speeds it was jumping back and forth between OD and 4th..then when I’d come to stop it...
  14. 9

    Trying out my DTI timing unit

    I’ve yet to time my truck. I’ll either make the trip to Poland and have brian time or or I’ll buy the kit. It’s a wash given the cost of fuel! My truck definitely seems to have a bit more gray exhaust smoke vs black..i’m guessing it’d timing is off.
  15. 9

    Dash lights

    So I’ve had some issues with my light switch burning up once in the past. And I changed it out..but recently I was driving at night and lost my dash lights. The high beams also went out and when I went to low beams and back to high it worked again. Not sure what’s up but I’m guessing it’s the...
  16. 9

    What is the part I’m missing? Ignition trim?

    I’ll need to rekey the doors?
  17. 9

    What is the part I’m missing? Ignition trim?

    So I’d like to get that chrome finger/thumb thing so I can stop torquing on the key. What’s the part im missing?
  18. 9

    Wiring harness and thinking about selling

    I’ve got a 350 with a 97 front axle. This truck looks like it’s got a lift right? I like the dodge mirrors and the 19.5 rims. I’d just need the dually flares, mirrors and wheels and I’d have the same rig.
  19. 9

    Wiring harness and thinking about selling

    Now what’s my best option to unlift it?
  20. 9

    Wiring harness and thinking about selling

    Well I listed my dodge for sale. To many projects..I tend to agree with the older engine being simple and that being good. So for now I’ll keep it. I’ll grab another turbo idi motor for a future spare and perhaps a 5speed manual swap. The other thing is I just rebuilt the axle, and have tons of...
  21. 9

    Yet another heads thread

    Do they swap out injector cups?
  22. 9

    Someone go get it!!!

    Yep mine flip forward so my guess was right. They’re so reclined and probably need new foam..you sink in like 3 inches..it’s plush but to much for me. I’d like a stiffer bench seat
  23. 9

    Someone go get it!!!

    since I see people talking seats..I feel like I have bronco seats..I’ve got a middle counsel and arm rests up front. But the position is way to reclined and it’s like sitting in a lazy boy. Are they all so reclined?
  24. 9

    What’s it worth?

    Yeah mine just said Ford on the intake. I listed it all together for $1300
  25. 9

    What’s it worth?

    Yeah 093.. messed up. And you’re probably right it’s a core that ran. I would never sell it as anything other than that. Perhaps I’ll pull the turbo parts off clean them up and sell them separately or with the motor. I just hate to see it sit. And I’ve thought about rebuilding it but like most...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,949
Members
26,578
Latest member
dogdanblue

Members online

Total: 1,421 (members: 8, guests: 1,413)

Share this page

Top