Search results

  1. pelky350

    088 turbo question

    You mean to eliminate the slip fit into the back of the turbo?
  2. pelky350

    Zf5 fluid

    So does that mean my trans is dying at only 180k? It only seemed to start doing this after changing the fluid out. Idk if I told matters much but I did put a thing of Lucas in a long time ago when I was low on fluid? But again the amount of gunk and debris I got from the trans fluid change...
  3. pelky350

    Zf5 fluid

    It almost acts like a hydronic issue but they are only a couple years old and so is the clutch it's a luk single mass
  4. pelky350

    Zf5 fluid

    Atf
  5. pelky350

    Zf5 fluid

    I thought I was reading to put synthetic atf in my transmission over mercron v but after changing it to mobile 1 synthetic it likes to kinda pop into first gear is how I would describe it? Almost like clutch isn't in all the way like a pop kinda grinding metal sound. Not every time but about...
  6. pelky350

    2wd f450 front leafs on 4x4 f350?

    Well I've been wanting to life my truck and since I'm in a 88 I can't really do the whole super duty conversion thing, I mean I couldn't with fab but I'm looking for bolt in, I want a rsk kit still and though about that with just my level kit for 4.5 inches total which is probably plenty for me...
  7. pelky350

    Filled up with B99

    Yes I have vitom o-rings already, I was meaning seals in my injection pump.
  8. pelky350

    2wd f450 front leafs on 4x4 f350?

    Someone mentioned I could bolt on 2wd f450 front leafs on my f350 4x4 for a 6 inch lift. Is this true? I ask because I can get a set of those springs for basically nothing at the salvage yard. If it is possible anyone know how it would ride after?
  9. pelky350

    Filled up with B99

    If it can eat fuel hose can it eat seals in the injection pump?
  10. pelky350

    Filled up with B99

    I ran it one time, did quiet it down quite a bit. Too bad we don't have more info on it on here, its available to me easily here. But I'm to worried about potentially shortening the life of my injection system to run it. Paid to keep much to experiment with new fuels. Until more is known I will...
  11. pelky350

    1.7 rockets on 302?

    Bone stock motor though? I'll probably get the studs anyway since it only like 30$ this is only because I'm already replacing valve cover baskets not wanting to get to into it just some small bolt on stuff. Heads are a bolt on thing but it's just a toy/spare truck kinda thing. Loud exhaust no...
  12. pelky350

    1.7 rockets on 302?

    I want to put 1.7 ratio rockers on my 302 while everything is off the top, it's a 1987 bronco 5.0 with efi. Heard it help and a little on power and wholes it apart figured why not? What all do I need to put them on plan on putting new push rods too since they can just be dropped in there. Do I...
  13. pelky350

    Rsk kit on a 88?

    Yeah, I was looking at the one designed for my truck from sky's not the 92+ version, I know that wouldn't fit. Wish they had more a a lift style one for mine though just a couple extra inches so I won't want to buy lift springs anymore lol
  14. pelky350

    Rsk kit on a 88?

    It looks almost the same? So if theirs can just bolt on why can sky's not? And why does it cost so much lol
  15. pelky350

    Rsk kit on a 88?

    ORU?
  16. pelky350

    Rsk kit on a 88?

    Can you take a picture of what your talking about? Where it would be welded but you didn't?
  17. pelky350

    Rsk kit on a 88?

    When I saw the pictures on their website I didn't see any welds on the frame, but on the instructions it mentions welding but I don't do well without pictures on instructions for it
  18. pelky350

    Rsk kit on a 88?

    Springfield / Eugene area yes , maybe I could see the kit before I buy it too, I'll probably go next week sometime and see
  19. pelky350

    Clutch experts! Need opinion!

    My luk clutch is doing great on my 7.3 idi, but your symptoms sound very typical of a worn out clutch in need of replacement. How old is it?
  20. pelky350

    Rsk kit on a 88?

    Sky's make the kit for a rsk on my truck but I think uses the stock springs, it explains on their site that the super duty spring swap works on then 92+ trucks because the frame is longer up front to accept the longer springs. Maybe I should just go to their shop and ask it's like 10 minutes...
  21. pelky350

    Rsk kit on a 88?

    I'm wondering how involved the instal is, it look at sorta straight forward but I also like to see things done, reading the instructions make sense sorta but the pictures they have don't really even show what needs welded like they mention. Is welding maybe just a option in it?
  22. pelky350

    Fuel lines

    The extra capacity tank you can buy for a bronco is 38 gallon. But yes normally they are 33 gallon tanks I own a 87 Bronco lol
  23. pelky350

    Rsk kit on a 88?

    Does this really help with the ride quality like some say? I learned you can't use superduty springs on mine because the fram length isn't too short up front but it also does a 2.5 inch lift at the same time. It says it needs welded onto the truck though, how much welding is required and degree...
  24. pelky350

    Fuel lines

    That's kinda what my plan is just to run a larger rear tank when I get it able to instal, for right now i was planning on making a temp set up to get through, I think since the 38 gallon bronco tank is more common I may go that route and sell my current extra tank I have. It's a home made on...
  25. pelky350

    Fuel lines

    Okay so I don't need bigger lines, what kind of lines should I run to My front tank for now until I complete my rear tank set up I'm gonna finish building, I plan on running a single large tank later on, got the tank but need a way to make a fuel send for it and straps of some sort

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,953
Members
26,579
Latest member
truckonfire

Members online

Total: 1,586 (members: 5, guests: 1,581)

Share this page

Top