Search results

  1. 03wr250f

    Quick turbo question

    imo the stock factory turbo/ats 093 kit is the best for upgrading/building off with hypermax being the second best. and banks being the worst. the factory turbo has parts availability as does the hypermax, the hypermax turbo sucks tho. So for the fuel you have planned you would have to upgrade...
  2. 03wr250f

    Dana 50 TTB knuckles on Dana 50 SA center section - Possible?

    OH i 100% agree with you that the obs 350 is the best option, but people always seem to complain about not being able to find them under $1000 so i figured i would throw out another axle that can be made to work, and yes there is a lot of work involved for a dodge axle to be useable.
  3. 03wr250f

    High egts and low boost pressures

    He said he is making 7psi boost, he is making enough for the wastegate to open. that high of egts, does sound like a leak somewhere, but I would also bet on timing like IDIot said. those egts do sound high. Are you still running the factory crushed downpipe? that could be huge, also are you...
  4. 03wr250f

    High egts and low boost pressures

    its unlikely you will get it to seal there, it is honesly probably just wore out from time. you can loosen all of the connections to the wye pipe and the up pipe( that likely includes reclocking the turbo) and try to get it to seal better. Before I went reclocking the turbo i would play with the...
  5. 03wr250f

    Dana 50 TTB knuckles on Dana 50 SA center section - Possible?

    i think what may be more plausable for you @Macrobb would be to find a dana 60 from a dodge 2nd gen (more than likely gasser I doubt you will find a diesel one, but i dont think it mattters.) and swap ttb50 knuckles on the outside of it. It can be done, but not easily.
  6. 03wr250f

    What do y’all pull with your truck?

    psh that would mean actually getting her nails dirty. I cant do that, so the answer is nothing. lol
  7. 03wr250f

    Anyone using new Banks, Hypermax, R&D, or home made turbo kits?

    you want my advice, buy the r&d kit hands down. light years ahead of banks and hypermax or even a used ats 093/ factory turbo kit. way more room for servicablity in the engine bay, way easier to work around, and easy to remove for more extensive work plus top notch in performance. No questions...
  8. 03wr250f

    Strange issues, tried basically everything

    @pelky350 like i told you compression test first then go from there. I agree with brians theory as well i am all for having massive amounts of supply fuel. I am at the point where I will no longer recommend the carter and i for a long time have not been recommending facets, only holleys or...
  9. 03wr250f

    Carrier/facet pump observations

    @SPR1NK
  10. 03wr250f

    Can we talk suspension parts?

    i would buy either spicer or dana parts moog has turned into the same crap as every other parts store crap
  11. 03wr250f

    Wrapping intercooler piping.... options/opinions thread.

    When I pondered doing this what i came up with was to do similar to the 7.3 super duty. they left the hot charge air pipe unwrapped and the cold charge air pipe wrapped with a insulational tape of sorts. there could be cases for both wrapping and leaving it unwrapped on the hot pipe. the hotter...
  12. 03wr250f

    R&D

    R&D is absolutely still in business. It is just a one man show, and that makes it hard to complete orders in a timely fashion, especially when your suppliers of various parts simply arent getting you parts fast enough. It sucks there is a wait time, but in my opinion it is well worth it for the...
  13. 03wr250f

    Project Rewbrooks

    I have generally seen a 2-3 psi drop in boost psi when intercooling and about 2-300 * drop in egt from intercooling. a stock ats 093/ heck any turbo will benefit from intercooling. it may lower boost, but colder air will gain you more power than hot boost. Intercool. go for it you wont regret...
  14. 03wr250f

    boost related ticking?

    hope ya get it figured out man, and do let us know what comes of it all
  15. 03wr250f

    Aussie headlights for Bricknose 87-91

    personally I think they are cheap since I have $600 into a set sourced from australia. May not be much there,per se but huge amounts of r&d in product development to make your own, and make it better than aussies. besides good labor aint cheap.
  16. 03wr250f

    i cant get my IDI to run!!!

    glad to hear it is more responsive and spools better now. thats like 3 times better than the old setup! on less fuel to boot!
  17. 03wr250f

    New Headlites, '87-'91

    Guys check out this link https://squareup.com/store/obssolut...Qc_XfpO0ZkHcc30_qz5yi8k0vykWECgfSIhllT2 7WZbnE
  18. 03wr250f

    Performance parts

    be patient with r&d and keep trying. his products are worth the wait. he is a one man show. it is hard to answer the phones and build stuff
  19. 03wr250f

    Aussie headlights for Bricknose 87-91

    Well in case yall havent heard what is going on in fakebook. the elusive austrailian headlights for bricknose 87-91 fords have been found. All the info you need is on their website. Obs solutions remade the original aussie headlights then found the originals shortcomings and fixed them A whole...
  20. 03wr250f

    Aftermarket valve covers

    i simply had mine powerdercoated blue sparkle
  21. 03wr250f

    New headlights for the Logger, custom brick nose projectors.

    No, I asked him that a few months ago. when he had a battery burn down it melted some of the headlight. and he just took the other one off. Also there were all kinds of reports on facebook of cody taintor the owner of outlawleds.com having shoddy work, lots of people having to return stuff to...
  22. 03wr250f

    A blast from the past......literally.

    @Oledirtypearl86 let me help ya if ya want a fast idi, or at least more power. turbo. intercooler, turn up the pump, head studs, valve springs 3'' dp, that will give you a good increase. you want more go water meth, like a 10 gph nozzle and spend $30 on one not the cheap ones. you will be very...
  23. 03wr250f

    This weekend its finally time

    I guess I am curious why you think that the water meth did it in? I have ran 2 500 ml before with a 300 psi pump and oh boy it scoots an there is a tremendous amount of power on tap with just a switch that way, but I dont think that it would be the demise of it. I took it off due to no need for...
  24. 03wr250f

    Exhaust restricive

    I am with @laserjock run a diesel flow through muffler. it keeps it quiet outside the truck to where you can still have a conversation over you exhaust, sounds quiet in cab, but allows you to still hear whistle and engine noises when you roll down the windows and get on it. It is very little...
  25. 03wr250f

    A blast from the past......literally.

    Yes I did, It definitely made me smile. However hearing that he passed away, I truly am saddened .

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,944
Members
26,578
Latest member
dogdanblue

Members online

Total: 1,552 (members: 10, guests: 1,542)

Share this page

Top