Search results

  1. rreegg

    So what did you do with your truck today?

    No replacement for displacement.. And new ip and injectors
  2. rreegg

    Paint opinions

    Ford blue elsewhere on the engine with white filters could match the rest of the truck?? Because Murica! I think engines look great painted but have had concerns/worries in the past with getting paint chips into injectors and stuff when working on them after, don't believe it's caused any...
  3. rreegg

    So what did you do with your truck today?

    I never have but harbor freight sells a mini one which appeals. They seem best for welding/slag removal and I’m just not welding much at the moment. Seem they’d work well for rust and paint cleanup though
  4. rreegg

    Battery dash light + voltage

    Scanner at the auto part store said the voltage reg was bad so just replaced it. Thanks all for the help
  5. rreegg

    Battery dash light + voltage

    Dash battery light and static 12v on gauge happened both in morning and afternoon driving. It’ll flip flop between on and off for about a minute or two on either side - then stay off when the coolant temp is above ~180 Will test alternator
  6. rreegg

    Battery dash light + voltage

    @DougBoy66 not sure, is this external?
  7. rreegg

    Battery dash light + voltage

    The concerning thing is when the dash battery light is On the aftermarket gauge will be “stuck” at 12v and not jump up when given throttle. Just want to make sure the alternator isn’t slowly givin out. So whatever the issue is it has shared behavior between dash cluster and aftermarket gauges...
  8. rreegg

    Battery dash light + voltage

    Couple months ago the battery light on the dash was on momentarily then went off - seemed like a blip because the after market voltage gauge seemed to be above 13.5V. Now today I’m seeing the dash battery light come on/off again. While parked with the battery light on I can Rev the engine and...
  9. rreegg

    Pressure Plate Release Arm

    Dang sorry to hear. Am having a difficult time fully understanding the issue - slave cylinder rod is fully extended and issue with clutch fork disconnecting from release bearing? If this is the original clutch assy might consider replacing the whole thing.. including the clutch fork :fan:
  10. rreegg

    So what did you do with your truck today?

    Right on. Do you think a needle scaler would’ve worked well here or wire wheel be better?
  11. rreegg

    So what did you do with your truck today?

    I thought to cowboy the oil without a funnel but decided to funnel, the spout really opens up. went to Walmart expecting to get 3x gal of their brand but walked out with the rotella box wine. For just a few dollars more. It’s a little nice to not have a bunch of jugs around but I don’t have a...
  12. rreegg

    So what did you do with your truck today?

    who put this filter on so tight? oh was me. never had an issue of overturning filters before but using two filter wrenches offset worked really well to remove. First time with the boxed oil too..
  13. rreegg

    Scam alert

    Is there any way to request a charge back from the payment processor or similar?
  14. rreegg

    Wiring Troubles 1993 7.3 IDI

    how is the health of the pos/neg battery cables?
  15. rreegg

    Axle tag

    That attached site may have it, there’s an index at the bottom and you can select axle codes it goes back to the ‘60s
  16. rreegg

    Project White F250 Restore

    Send it and s’go Beavs!
  17. rreegg

    Axle tag

    V130C is 4.10 with 10.25 non locking per https://fordification.com/tech/rearends_ford17.htm
  18. rreegg

    7.3 IDI ZF5 south bend clutch help!

    I don't have firsthand experience with south bend but hopefully someone more knowledgable can chime in. This Product page for the southbend clutch says it’s only compatible with the south bend fly wheel. Additionally from some other threads around here think the southbend is a 13" while the LUK...
  19. rreegg

    So what did you do with your truck today?

    Speaking of ford getting it right the first time… just got finished wiring up a headlight relay harness. Threw me for a loop for a bit because thought it connects into the main wiring loom but finally saw a video showing how it plugs into one old/original headlight pigtail. Then the other...
  20. rreegg

    Rear drum brake keeper spring pop off

    Thanks all for the input and the sanity check - the design does seem a bit brittle for the J hooks so not surprised they’ve popped off for others. This is actually the second time they’ve popped off for me after replacing pads and hardware last October. Fingers crossed it stays put because the...
  21. rreegg

    Rear drum brake keeper spring pop off

    Haynes manual calls these the “hold down” springs, for what’s it’s worth. Keeper springs is my own term
  22. rreegg

    Rear drum brake keeper spring pop off

    Anyone had issues with the rear drum brake keeper springs popping off before? These are the ones that have the silver J shaped hangers to hold in place. Went down to adjust the shoes yesterday and noticed both the J hangers were missing on the passenger side. I’m not sure how this happened but...
  23. rreegg

    Core support fix???

    @JackJ217 would it be possible to update your signature with your year/model? Might help a bit with fitment etc. forgive me if I’m just missing it on mobile - is your truck an OBS?
  24. rreegg

    So what did you do with your truck today?

    AC has been working great!
  25. rreegg

    So what did you do with your truck today?

    were you cruising hwy at 60 for most of those 500 miles? Curious on what rpms and mpg you were seeing

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,574
Latest member
abcdefg

Members online

Total: 1,662 (members: 8, guests: 1,654)

Share this page

Top