Search results

  1. KansasIDI

    New age headlights

    Just to chime in, I’m very happy with an Aussie conversion and Holley Retrobrights on my 91.
  2. KansasIDI

    Coolant temperature switch and coolant overheat switch fail at the same time?

    So, my 91 just has one coolant temperature sender (Canadian market truck). Is it possible that his truck just has one as well?
  3. KansasIDI

    Cooling system upgrade time

    I noticed the same when I installed @03wr250f’s fan and clutch kit on my 91.
  4. KansasIDI

    6.9 idi only idle at full throttle

    Your video didn’t show up…
  5. KansasIDI

    1986 F250 6.9 IDI Turbo Kit recommendations

    Right you are. And Hypermax makes an intercooler kit designed to work with either their Pulse kit or the ATS 093. My only complaint is the leaks on the exhaust side can be difficult to seal up. I might switch my 91 to an 093 kit someday.
  6. KansasIDI

    Great CDD experience

    I’ll just say this. I’ve had the good and the bad with CDD. I will do business with them, but they’re not my first choice… I can sympathize with the like and dislike of their service. I also know someone very close who had a real rough run through with them, he’s out on their products, and...
  7. KansasIDI

    1988 E350 7.3 Hypermax

    It’s possible. You could put a gauge of some kind on the Schrader valve in the fuel filter head, or a more permanent gauge in one of the other ports on the filter head.
  8. KansasIDI

    1988 E350 7.3 Hypermax

    It should be. Do you have a boost gauge? What does it show when uphill and putting some pedal into it? What EGTs are you seeing? If your EGTs are staying under 1200, maybe start with a flat or two, you can adjust it easily enough, shouldn’t have to mess with it more than a couple of times to...
  9. KansasIDI

    So what did you do with your truck today?

    Spent some money on some new shoes (more like work boots) for my service truck. The front tires currently on it are in good shape, but the rears are at 30% tread, and only 20k miles on all 6 tires. This truck is too heavy. So upgrading to 19.5s from 16s. These F-Superduty trucks should have come...
  10. KansasIDI

    THIS is getting old!

    Ahem… (cough cough) https://www.zoro.com/groco-6-port-fuel-valve-12-in-supply-fv-65038/i/G505728413/ (A) Problem solved! But yeah, definitely check out what’s going on inside your tanks.
  11. KansasIDI

    Takin a little trip to Corpus Cristy, Tx.

    Safe travels and good luck.
  12. KansasIDI

    7.3 IDI Return Cap #2 & #8 won't seal

    Are basically impossible to seal the first time in my experience. Oil the second new set of O rings, after cleaning everything up with a rag first. Should go right on, leak free. The first set always gets a bit cut up in my experience.
  13. KansasIDI

    Mahle head bolts? Quality?

    Studs can be done in frame, it’s just more of a pain than pulling the engine IMO. I prefer to pull the cab cookooLOL
  14. KansasIDI

    Cruise control issue

    I also have this problem. No idea why.
  15. KansasIDI

    A/C compressor manifolds??

    My 86 had that. I never did get it working right.
  16. KansasIDI

    Project White F250 Restore

    What are you talking about? What is a weekend? LOL
  17. KansasIDI

    performance electronic fuel pump

    I had a couple of those, they sure didn’t last very long. But I had the same short-lived experience with the Holley pumps. What I have found to work best is to use a 7.3 Powerstroke stock fuel lift pump, and a fuel pressure regulator. Justin at R&D makes these kits, I have one that I am...
  18. KansasIDI

    Electric fuel pump recommendations

    @Clb This one?
  19. KansasIDI

    Crossmember ZF5 Help

    Here to confirm, F-Superduty crossmembers are different and not compatible with other models, from what I have seen.
  20. KansasIDI

    Sky's Offroad RS Kit's Problem

    08-16 is uhh… coil sprung in the front. Same with 05-07. 99-04 is leaf.
  21. KansasIDI

    Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else

    @crazydane How’s this project coming along?
  22. KansasIDI

    A real head scratcher.!!

    @Jesus Freak wait a minute wait a minute what about 6 way manual valves? https://www.zoro.com/groco-6-port-fuel-valve-12-in-supply-fv-65038/i/G505728413/ HMMMMM??? LOL
  23. KansasIDI

    So what did you do with your truck today?

    Went and picked it up. It’s been rebuilt, and through a strange turn of events I bought it for way too cheap. It’s a 2WD unit, but these are easy to convert to 4WD, as the tail housing isn’t the main housing, and the tailshaft comes out from that end, unlike an E4OD. The 4WD parts are in the...
  24. KansasIDI

    Someone go get it!!!

    Thomas County. Went through Edmond the other day. I was in a rush though. Going via Norton is a lot smoother to get on 36 to get to the southeast corner of Nebraska, where we just finished working, and thus moved equipment west.
  25. KansasIDI

    So what did you do with your truck today?

    I’d have preferred that he had chose to be a little bit nicer and stuck around, y’know? You don’t have to agree with the majority, but at least be nice to the new people asking questions, instead of telling them why they need to rethink their entire way of working in their truck, and being...

Latest posts

Forum statistics

Threads
92,997
Posts
1,155,937
Members
26,574
Latest member
sramasya

Members online

Total: 1,587 (members: 8, guests: 1,579)

Share this page

Top