Search results

  1. O

    7.3 idi cdr valve tube question

    Just ordered 6 from Ford Parts Giant. Total with shipping, $44.71 best price anywhere. E-Bay $17.85 and $19.55 with free ship. Swag Performance, $25.33, and probably shipping. Goat
  2. O

    7.3 idi cdr valve tube question

    If that is for the 2 pieces, that is a killer price. I see them going for a lot more $$$. Goat
  3. O

    Hydro boost question

    Write up does not say anything about the mod to the brake lever. I clicked on the one for the Bull Nose. (which I have) Though he does mention a 2 hour install. I have read that a new hole needs to be drilled though, maybe that is if one is pulled off a F-450 in the JY and installed on earlier...
  4. O

    So what did you do with your truck today?

    Sorry to hear about your loss IDI. You may not have been close, but every one that passes through our lives adds something to it one way or the other. Goat
  5. O

    No fuel pressure after running dry

    With 12 gallons added, should be at least 1/2 tank of fuel. If you flipped between tanks, the FSV could be the culpert not showing anything on the gauge. I assume you have the mechanical Fuel Pump. Maybe try splicing in a electric pump to purge the system. Goat
  6. O

    Temp Gauge Sender & Temp Light Switch

    Rock auto has the part #, click on info. https://www.rockauto.com/en/catalog/ford,1986,f-250,6.9l+420cid+v8+diesel,1124020,cooling+system,temperature+sender+/+sensor,4748 I didnt see the over temp idiot light one. Goat
  7. O

    So what did you do with your truck today?

    I don`t know what`s going on with the Clutch Peddle, but have a lot of travel till I have pressure the rest of the way. Also it engagement is just off the floor. Think about 4 years ago I pulled a peddle assy of a 85 250. Took it apart, wire wheeled everything, painted the levers etc...
  8. O

    Throw out bearing noise?

    Here is one on E-Bay...
  9. O

    Interesting Oil Leak

    The Bolt you are concerned about, looks like a Stud. The Nut looks like it secures the tin bracket for the Cable going to the Starter. Under it looks like a second nut . It`s most likely threaded in as far as it will go. I would need to go look at my engine to refresh the gray matter. Been a...
  10. O

    rotary fuel pump

    When I First met my Wife (or before we got Hitched up) I checked her teeth real good. There`s some in DC a lil long in the tooth that need to be put out to Pasture. Goat
  11. O

    7.3 IDI turbo delete - fuel

    Correct. I said as "I remember". I forgot the Dowel Pin, was thinking was a line. :idiot: Knew I had to "Line" something up. I`ll make a correction in my post above. Goat
  12. O

    7.3 IDI turbo delete - fuel

    All these engines have Blow By. On the side of the IP is a triangle plate with 2 screws holding it on. Remove the top screw and just loosen the bottom one, it will swing down and hang on it. Makes it easier to get the plate screwed back on. There is a rubber seal under it, be care full of it...
  13. O

    Throw out bearing noise?

    The two Bearings I had problems with, when removed, the thing was all loose and wobbly. Spun like no grease in it. Maybe they do not put much of any in them from the factory? Goat
  14. O

    So what did you do with your truck today?

    Going to be fun watching the critters fly out the Tail Pipe all black and sooty. My Wife drove the truck today, and noticed a difference the way it ran. Goat
  15. O

    ODOMETER I need to repair the odometer in my '86 F350 - I think there's a nylon gear that fails on these...I've got the Cab and chassis 4x4 w/4.10 gea

    The Cable runs both. The Odometer is run by the gears. Looking at the face of the Spedometer, there is one plastic gear shaft, that goes to the right, and drives another gear shaft faces forward that turns the Odometer numbers. Also as the spedo cable it turning, it spins a magnet in a cup...
  16. O

    89 350 non turbo 7.3

    2 group 65 Batteries. I get mine from Costco, never had a problem with them. Goat
  17. O

    So what did you do with your truck today?

    I have had this 86 10+ years. Just noticed there is a screen inside the Tail Pipe a good 6" in. Looks like a bunch of 3/16" hole`s. Iam going to knock it out of there....but is welded in pretty good. Picked up a 12" long 3/8" Drill Bit from Harbor freight. Drilled out all the holes inside the...
  18. O

    Injectors Out And On Their Way To Moose Tomorrow

    Little tip installing the Injector Copper washers. Use a narrow slot or a Phillips Screw Driver. Put the washer on the shaft, hold it with your Finger, stick it down into the hole, and let it go. It will be lined up perfectly. Be sure to use Anti-Seiz on the Injector Threads, and the GP`s also...
  19. O

    Injectors Out And On Their Way To Moose Tomorrow

    I was on Russ repair web site, looking to buy his Clutch Line. Wasn`t listed and contacted them. They refered me to William Deering. He replied to me... "I bought Russ inventory of injectors and parts after he passed. And as Michelle stops selling certain items on the website I'll offer them...
  20. O

    Anyone got a part number for 6.9 valve cover washers and bolts?

    Learned something new. Didn`t know Summit Racing sold these. And they have Chrome Plated one`s? :thumbsup: Another 10 HP right there. Goat
  21. O

    Update tapping noise

    Harbor Freight sells the mechanic stethescope. Could just be an Injector making the noise. Have you loosened up each Injector line when it is running to see if the noise goes away? If so then you will know it`s that Injector. Maybe it has been said up above? Amazing all the strange noises you...
  22. O

    Injectors Out And On Their Way To Moose Tomorrow

    When I was at Justin`s shop, I mentioned I had some used Injectors if he wanted them. Told me at that time, he only buys new Injectors and then goes through them so they are all straight shooters. That was a year N half ago. Goat
  23. O

    Best Online Vendor For Parts

    https://idiperformance.com/ https://classicdieseldesigns.com/?srsltid=AfmBOopIFncvt1nV2SzDNfJ1K76p9jBoiTMUHVbS11APJey-tzBEMLdc https://moosediesel.com/ These are the three recommended on the Forums. Goat
  24. O

    New Here And To The 7.3IDI

    Gotcha...well I can pretend you bought it that way...;Sweet The VC`s are always a leak problem, and the Pass side leaks all over the Starter. Last July/Aug I replaced the IP and Injectors I bought from R&D IDI performance. I read where one of the guys had a couple of the HYD Lifters have a...
  25. O

    Best Online Vendor For Parts

    Here is a good source for the Fuel Tank Sending units. https://www.gastankdepot.com/ford-truck-diesel-fuel-sending-units.html I use Rock Auto some times. Some orders come from different wear houses so shipping will be from ea place. Use O`Really`s, have used Part`s Geek a few times and Bronco...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,574
Latest member
abcdefg

Members online

Total: 1,663 (members: 8, guests: 1,655)

Share this page

Top