Search results

  1. M

    Throw out bearing noise?

    I thought perhaps the clutch fork might be loose. NOPE. I dont know if the TOB may have slipped on the clutch fork. Either way the "thumping noise" appears to be more prevalent on the passenger side. The engine sounds good and performs marvelously . The adventures of LuLuBelle continues...
  2. M

    Throw out bearing noise?

    I recently changed out the clutch and throwout bearing in my '89 F-250. Now I have a "clacking" noise coming from the area of the passenger side rear of the engine. It usually happens after the engines warms up and I can feel a smal"pulse" coming through the transmission shifter . I bought...
  3. M

    Looking at Diff Lockers & LSD

    I've got a factory limited slip diff running 4.10 gears. Even on ice I get pretty good traction. On the dirt roads at the ranch I have zero problems with it. I pull my 24' gooseneck and it handles just fine.
  4. M

    stereo installation

    Can’t Write , I’ve got a stereo with cd player that was a gift. I’m a LEO firearms instructor with bad hearing ,but I’m looking for a better receiver than what came with LuLuBelle. NERO Thanks for your info.
  5. M

    stereo installation

    I want to change out the radio in LuLuBell, and I would like to know if anyone has ever used a adaptor kit to install a stereo. I would like to know the brand and model number of the installation kit. My LuLUBelle is a 1989 F-250 with a stock (crappy radio). Any assistance would be greatly...
  6. M

    finished fixing ol' LuLuBelle!

    Well, I finished replacing the steering gear box on my'89. It steers a whole lot better that before. I still had little slop in the steering which I attributed to the 2 piece steering column. I noticed the 2 piece column had slop when I turned the steering wheel. Knowing it probably needed a...
  7. M

    7.3 temperature gauge dropping under load

    Have you checked your fan clutch to make sure it s not locked up like mine. Cant get mine past 165 with a trailer load of cattle and a/c going on a hot june day. Man it makes a horrendous noise like aB-52 on takeoff.
  8. M

    So what did you do with your truck today?

    i Have the factory tanks but I also have a 100 gallon reserve tank in the bed. If I figure right I can get about 2200 miles, or about one week of idle time running my power inverter. We use it for my sons medical power when we have power outages. never gonna get rid of that old thing...
  9. M

    California ( and others ), RV's, and more laws...

    Ill keep my '89 7.3 idi, and stay out of Ca.
  10. M

    Replacing clutch and flywheel

    Not that hard to pull the shifter our. It is ijust 2 bolts if I remember correctly.
  11. M

    Work horse or pig

    Have someone look at your IP. Out here in flatland Texas, can pull a fully loaded 23" gooseneck livestock trailer down the road, at 65-70 with a/c on. Mind you I have a ZF5 and 4.10 LS rear. Top speed ?? I dont care to know-probably 85 mph but then I'm not looking for speed, just pulling...
  12. M

    Winter idle

    Myself I like to place a large piece of cardboard in front of the radiator to stem the air flow. Works fairly well for me in this mild winter weather we have in Texas. Around here it can get down to 28 degrees in the morning and 85 degrees in the evenings. Its pretty handy for us.
  13. M

    7.3 IDI excessive oil usage

    Mine leaks a quart every 500 miles, and I dont charge my employer for seal coating the parking lot with 15w40 Rotella! LOL!
  14. M

    ZF5 Owners I need your help

    IDIBRONCO you are so correct. Guess Ill wait until next month to buy a 21 tooth gear.
  15. M

    Wrong again

    Well I swapped out a 19 tooth Speedo gear for a 16 tooth gear and it SLOWED DOWN my speedometer reading. I thought a smaller driven gear would spin faster. Apparently NOT!! Sometimes I wonder if I could come in 3rd in a 1 person race! Back to the drawing board my friends
  16. M

    ZF5 Owners I need your help

    While this may not seem right I have measured the odometer against the mile markers on Interstate 20 I find the odometer to register 10% more than the distance traveled. Ive 2 different speedo gears coming soon : 17 and a 16 tooth driven gear ..... Ill find out which is closer to the right...
  17. M

    ZF5 Owners I need your help

    Alright crew, heres the story: I know Ive got a pink speedo gear with 19 teeth. AT 2100 rpm I show 66 mph but GPS says 59, therefore I think I need a 18 or 17 teeth gear .... Am I correct in my assumptions? Most days I place the Iphone on the dash and read off of it the speed it shows. NOt...
  18. M

    ZF5 Owners I need your help

    IF you are running a ZF5 transmission with a 4.10 final diff ratio, I need your help. On the ID plate of the ZF5 there is a speedometer code of some sort. If anyone can provide me with the code on your transmission I would sincerely appreciate it. Ford dealer is not helpful here.
  19. M

    She just... died....

    if you have too many keys on your keys ring, centrifugal force may cause the keys to shut off ignition- just a thought.
  20. M

    Give me your opinion

    Before I dive off and replace my steering gear box, let me ask you this: LuLuBelle was out of work for 6 months. I replaced the clutch set, and when started to drive it around the steering was more stiff than before. Now, to my knowledge this is a steering box issue or is it? Could it be the...
  21. M

    steering gear job!

    As soon as my $$$ from my second job comes in Ill run out and see what's available. The thing is just leaking like nobody's business. AND it seems to be so much stiffer to turn the steering wheel. probably throw a new P/S pump too. I guess that what I get for letting it sit for 6 months...
  22. M

    steering gear job!

    Ok guys, its time to replace the steering box on LuLuBelle my '89 F-250. Amy special tools I might need, any special instructions? Any tips? TIA
  23. M

    So what did you do with your truck today?

    Those bucket seats look nice, I prefer bench seats because I can wear my straw hat without hitting the seat back....Besides my sweetie can sit next to me as we drive to the ranch or the range ( same place- different pasture).
  24. M

    I did it!!

    I have installed 2, county them, 2 cup holders to my doors . i plan on making a small console to place in the front seat and have a place for 2 more cupholders. These will be used exclusively for coffee, as I plan on having a 12 volt cup warmer, to go with the seat warmer I have. I plan on...
  25. M

    I did it!!

    It took me 3 long weeks, but I finally replaced the DMF with a SMF from Oreillys ( I know , I know I should have bought better, but when youre a poor guy....) My son , helped placed the flywheel in place, and I ddi the rest. I forget what a job it it is. I turned 64 2 weeks ago, so that was...

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,108
Members
26,430
Latest member
Brownlee5212

Members online

Total: 923 (members: 6, guests: 917)

Share this page

Top