Search results

  1. O

    Sits one week, no power IP and GPC

    Sure as heck that’s where it was! The glow plug wires already burned years ago when I had this engine in the cab and chassis dump truck. I don’t know what happened, but apparently the amperage was too great and it melted the side of the plug badly so I just completely broke off the melted part...
  2. O

    Sits one week, no power IP and GPC

    Correct, turn over.
  3. O

    Sits one week, no power IP and GPC

    The wait to start light does not illuminate also. If you look at this wiring diagram that I just found, it appears there is one wire out of that and it makes its way to the glow plug controller, and that is also tied into the fuel cut off solenoid, which I never knew. Does this mean there is a...
  4. O

    Sits one week, no power IP and GPC

  5. O

    Sits one week, no power IP and GPC

    Good evening everyone. Went to hop in the 90 F350 (7.3 E4OD ) this evening, and no engagement of the glow plug controller, also no power to the injection pump. Everything was fine last week and now it just sits there completely dumb. Everything else works, and I mean absolutely everything else...
  6. O

    90 F350 frame up project

    Whileiminthereitus!? I knew there was a name for it! What a wretched condition to be afflicted with! I would not wish it on my own worst enemy. Seriously that is the best comment ever. It is already starting to come back around honestly . I have a few buddies that have gone from laughing and...
  7. O

    E4OD flexible dipstick tube opinions..

    Woah! That’s all I needed to hear that’s fantastic. Unfortunately, I do not know the brand, it was purchased from Classic Diesel designs with the proper dipstick length. Plug and play so to speak.
  8. O

    E4OD flexible dipstick tube opinions..

    Classic Diesel Designs
  9. O

    90 F350 frame up project

    That was the super crash course up until now. With only being able to post so many pictures at one time, I can’t really get in depth with every little step, but believe me this is nothing anyone should ever get into with a timeline. When it’s done, it’s done, and not a moment before. Time...
  10. O

    90 F350 frame up project

    More…
  11. O

    90 F350 frame up project

    Hello everyone. A simple transmission problem three months ago turned into this, not quite sure how that happened but when it is all said and done, it will definitely be worth it. Just wanted to share some pics. Went right down to the frame, had to replace the rear cab crossmember. Everything...
  12. O

    E4OD flexible dipstick tube opinions..

    Hello everyone. O93 ATS turbo. I modified the factory dipstick tube when the cab was off and I thought everything was good, but unfortunately there was still not enough room to run the way I wanted to so I purchased this flexible dipstick tube. If you snake it down behind the passenger side...
  13. O

    What is this seal on E4OD input shaft?

    Wonderful. I’ll be calling my trans guy first thing tomorrow morning. Anyone can make a mistake, but it just seems to never end anymore
  14. O

    What is this seal on E4OD input shaft?

    So tonight I was about to hook my trans back up to the engine. I filled the converter and when I was about to install it something caught my eye that just did not look right. When I put the light on it, I found this split seal has a rolled up, smash feature on it. I’m quite sure that’s not good...
  15. O

    Did I get played by a bad MLPS?

    Thank you. Will do. Gunna be a while.
  16. O

    Did I get played by a bad MLPS?

    Hello everyone. Backstory, my 1990 F350 7.3 with an E4OD had a free wheeling and neutral out problem. Always hooked up in reverse and with the lever in 2 and 1. If you search the last thread, I made probably over a month ago you will find a more detailed description. Fast-forward, two...
  17. O

    Borg Warner 1356 Vehicle Speed Sensor

    Thank you for the information!
  18. O

    Borg Warner 1356 Vehicle Speed Sensor

    Hello everyone. I pulled the cab off of my 1990 F350 pick up today. Seeing as how it was determined that I have to remove the transmission, I figured instead of dealing with all that nonsense underneath I might as well just do my cab swap since I have the excavator there anyway, and then work on...
  19. O

    My first E4OD…what is the issue?

    Well, I was able to find the contact information for my local transmission guy that I’ve known for 20 years, I always called him “transmission Jesus” I thought he went out of business over the pandemic, but as it turns out he put up his own four bay pole barn building on his own property and now...
  20. O

    My first E4OD…what is the issue?

    OK, I don’t have much more time to spend on this tonight, but I will say I did get a voltmeter on the truck and I have 5 volts solid at the lowest wire key on engine off. The center wire is a hot mess. 0.50 V low 3.23 V High I don’t have the damn torx fitting I need so I will get one and...
  21. O

    My first E4OD…what is the issue?

    Well, I used the OBD one scanner and the code I did get was 23 which is the FIPL. So I’m going to get a voltmeter on that thing and see what it looks like and tomorrow probably just changed it out no matter what. I have a feeling that is not the whole problem however and if it is, hallelujah...
  22. O

    My first E4OD…what is the issue?

    Yes that’s correct. Completely back to idle RPM. I have a class a CDL and I’ve driven big trucks since 2007. I’m not a fan of automatics at all. I always prefer a Non-synchronized manual. However, the automatics I have driven, none of them acted like that and this is big massive, heavy weight...
  23. O

    My first E4OD…what is the issue?

  24. O

    My first E4OD…what is the issue?

    What? This is normal operation for this transmission? It feels so very wrong to me. You let off the throttle it is not hooked to the engine at all. When you get back on the throttle, if you slowly increase, it does not do anything until you get to the RPM it let go at and then it hooks up...
  25. O

    My first E4OD…what is the issue?

    Well, I’ll let everyone know what the code say after I split apart the brand new scanner and fix the prong that is halfway pushed inside the body. Junk

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,108
Members
26,430
Latest member
Brownlee5212

Members online

Total: 808 (members: 3, guests: 805)

Share this page

Top