Search results

  1. D

    No Power to Fuel Cutoff Solenoid

    I've never seen a fusible link inside a wrapped bundle.
  2. D

    Different sized hib assembly's?

    You have a TTB front axle? It's a d50. O'Reilley probably sold you one for a d44hd If your new hub is about 3" on the outboard end, it's for a d44hd
  3. D

    6.9 with electric pump upgrade, hot starting problem

    It sounds to me like your electric pump is pumping fuel through the IP and cooling it. Suggests your IP is tired.
  4. D

    LED Bulbs

    @79jasper brings up a good point. Put some load resistors across the front bulbs and you can run whatever you want at all four corners.
  5. D

    LED Bulbs

    Oh. I don't know of a loud and electronic one. Sorry. Hook a doorbell to the flasher circuit. Ding dong Ding dong
  6. D

    LED Bulbs

    You gotta try what you got. I think my led lights have resistors because they work just fine with a can flasher. Any parts store will have an electronic one on the shelf. BTW. They recommend red behind red and Amber behind Amber lenses. My white behind red seem to function OK. Any dimness is...
  7. D

    To continue project or??

    Find someone that can fix it. Sounds like you're burned out. It doesn't seem like a good money after bad situation to me. Broncos are cool but they aren't trucks and can't do what trucks do as well as trucks do. I've owned both. BTW. All broncos should be white. Just sayin'
  8. D

    6.9/7.3 Fuel Line Sensors - How?

    I do believe they are piezo electric. Same as a ferret (rip) and other meters. Rotunda clamps to it and reads the mV signal. Piezo creates a signal when the line shrinks is my guess. @icanfixall might have a few of these meters. He probably has more info on them Fun fact. You need this in...
  9. D

    6.9/7.3 Fuel Line Sensors - How?

    For a rotunda timing meter
  10. D

    Why so hot??

    One last idea. Air in the system
  11. D

    Why so hot??

    Sounds like you're doing everything correctly. Any chance the t stat is in backwards? Where is the temp sensor? Mine is above the oil cooler and consistently reads 5 to 10 degrees above t stat opening temp What about the radiator being plugged or the bottom hose collapsing? With the numbers...
  12. D

    To continue project or??

    He did mention crush value
  13. D

    Why so hot??

    Or you could be buying a parts store thermostat which is not a motocraft thermostat.....
  14. D

    Injection pump help

    Maybe a dumb question No fuel with the lines opened to the injectors?
  15. D

    To continue project or??

    You forgot the or. What's your alternative? A new truck. A Prius.
  16. D

    Woodgrain no more...

    Try here if Wes doesn't have what you want. https://www.oilburners.net/forums/wanted.33/create-thread
  17. D

    Timed Switches... Send me to school

    Push button switch Delay on break timer Done
  18. D

    ""Need advice desperately!!!""

    That 6.9 is junk. You should give it to me and put it behind you. Just kidding. But I'd take a free 6.9 Stick with motocraft beru if you want to stay OEM. Research actual 12 volt glow plugs if you can't get the oem. This isn't the only engine that has issues with "compatibile" how plugs. We...
  19. D

    Walbro FRB-13-2 6-8 psi 43 gph

    I like this thread
  20. D

    trans fluid level after being towed

    I once had a tow truck hook his winch to the pan hard bar on a fiat when he pulled the car onto his flatbed. Bent the crap out of it and pulled the axle sideways. Easy enough to fix with a press. He wasn't a very pleasant person when I called him to let him know he should be aware of this with...
  21. D

    Knocking at higher end rpm ?

    I think you win a you suck award. Someone will be in the same boat in the future.
  22. D

    Bilstein # 24-016179 fronts too long?

    I hate it when my bushing gets buggered It looks like you've got only a couple inches on the bump stop.
  23. D

    Project: The New CDD Shop Truck

    OB.net: How fast is fast enough? Wes: One more mile
  24. D

    Maybe a 911?

    Congrats!
  25. D

    Looking for fusible links!!!!

    Pretty sure the red with green wire runs through that plug
Top