rreegg's latest activity
-
Hello All. long time listener first time caller. So I have a 1994 E350 that was a former Daytona Speedway infield ambulance. Its my... -
Here's one for everybody. This actually a dream I had last night. I had a late 70's model Trans Am that I had put an IDI into. It was...
-
Ahem.....lol......uhhhh..... well...... i just HAD to bump this....... sure its 12yrs old.....SURE No one ever responded to it...
-
rreegg reacted to jwalterus's post in the thread Tap size + cleaning threads + steering zerk with
Like.
1/4-28 thread (generic US grease zerk), tapered on the zerk so it seals tight rather than bottoming out They're probably metric zerks... -
Thanks for posting the link to Nick Pisca's webpage on that vacuum manifold. He's a member on FTE (and I thought here too). His username...
-
Here's a new video on YouTube about the Ford Bullnose trucks. He mentions the 6.9l IDI.
-
rreegg replied to the thread Underhood vacum.In case it's relevant for anyone here is Nick Pisca's diagram for the vac. manifold ports...
-
rreegg replied to the thread Underhood vacum.Thanks, Super helpful!:hail
-
Looks like as close as I can see.... From the vacuum pump to the vacuum tree, to the reservoir, to the servo, thru the servo to the dash...
-
rreegg reacted to Jesus Freak's post in the thread Tap size + cleaning threads + steering zerk with Like.
Shooting from the hip, id say you're pretty well gonna have to roll with it until you replace that tie rod.......unless you can find a...
-
Your biggest problem is that the tin cap on the rod end is thin. It's probably an 3/16-28 ( you have 28 pitch lt= lubrication thread)...
-
Couple years ago I replaced some steering components and needed to change from a straight zerk to 90* in one spot. The original threads...
-
-
The price seems reasonable if not a good deal to me, but I'm in expensive California. I'd second what Jesus Freak and DirtyWood say...
-
Well, if you're bored I guess it could be fun but it sure sounds like a lot of work if the body is the only good part. The lower...
-
Have a great, safe and enjoyable 4th of July.
