rreegg's latest activity
-
Also I appear to have found my exhaust leak... I had almost given up removing this manifold due to the heat shield and I'm sure glad I... -
First post for me, Oilburners folks have helped a ton on my 1989 "revive" I have a 89 with a manual and tracked down an issue with a...
-
rreegg reacted to scsmith42's post in the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed? with
Like.
That was some good insight about the Timbrens, I’ll keep that for future reference. The F250 does not have any overload Springs on it... -
Guys, I used to own a machine shop and have personally installed a lot of sleeves. Yes, this method depicted by the OP is not uncommon...
-
rreegg replied to the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed?.Unpopular/lazy option is to fly one way and rent a uhaul for the way back.. That’s a looong drive
-
rreegg reacted to Nero's post in the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed? with Like.
My in bed camper weighs more than that and I drove it with single rear wheel for years. Add air bags and you'll be fine.
-
rreegg reacted to Greenie's post in the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed? with Like.
I'd check rear tire temperatures at fuel stops - either with your hand or an IR contactless thermometer. That will give you a good idea...
-
rreegg replied to the thread 1994 F350 IDI Turbo help.Welcome and awesome truck. I'm assuming there is an automatic glow plug circuit on this truck and as I have no experience with them will...
-
New here to the forum and have some questions. It appears there is a lot of knowledge on the forum. I bought a 1994 350 IDI factory...
-
rreegg replied to the thread Tach cutting in and out.Post #4 op says replaced tach sensor. Seemingly all the low hanging fruit has been replaced? :cool
-
rreegg reacted to ROCK HARVEY's post in the thread So what did you do with your truck today? with Like.
Spent the last month or so completely rebuilding a 1995 Dana 60 to put in my f-250. I was told it had 4.10 gearing, but when I got into...
-
rreegg reacted to ROCK HARVEY's post in the thread What would you get with $50 for your IDI? with Like.
I’d get 2 of these bad boys: https://a.co/d/04bjlMP5
-
rreegg replied to the thread Precups now available.wow 1476 units in stock!
-
CDD started selling precups, so thats fun...
-
rreegg reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with Like.
Small update but I got my heads back from the machine shop so that is cool. Hopefully I will have some time to assemble soon. My focus...
