Recent content by reward_1000

  1. R

    WTB Factory turbo air box and cdr hose

    I can do that. PM me your address and I will get it ordered up and sent your way. Send me your email address and I will send you a copy of the invoice after I get it.
  2. R

    WTB Factory turbo air box and cdr hose

    Like it says, I am looking for an IDI factory style air box along with the cdr hose from the valve to the box. Let me know what you got. THanks
  3. R

    cdr hose

    Yes I know there was not a factory turbo on a 6.9 I am installing the 7.3 factory turbo. I had a Turbo Engineering setup on there from 1986 and it shot craps on me last year so I am swapping this kit on there now.
  4. R

    cdr hose

    I am in the middle of installing a factory turbo on my 6.9. I have the valve cover and the cdr valve, but what is used to run a hose to the air intake. I have a short shoulder on the valve and it looks like there should be a tube that fits inside of it to attach a hose to, maybe? Part numbers...
  5. R

    6.5l no power, dark thick tacky oil

    I am going to flush it out some more and then drop the pan and clean it all the way out. I have got another turbo located for it and then I will replace the oil supply line and the drain back to the block. This one has given me boost codes before but not this time. I will get it figured out. I...
  6. R

    6.5l no power, dark thick tacky oil

    I am working on this truck for a customer and am in need of some guidance. It is a 2000 3500 2 wd, 6.5l with an auto behind it. He uses this truck for his tent company so it knows nothing of an easy life. He bought the truck 4 years ago and shortly threw a rod through the side of the block. So...
  7. R

    Factory 7.3 idi turbo to 6.9 questions

    You have mail Frank. The old turbo system mounted on a different exhaust manifold that replaced the driver exhaust manifold. That is why I would have made a block off plate, but it will not be needed now.
  8. R

    Factory 7.3 idi turbo to 6.9 questions

    The turbo standoff does use the hole for oil drain back, so I will make sure the drain holes are big enough. I am going to make a block off plate for the driver side exhaust manifold where the turbo used to mount. Until I get another exhaust manifold that is. The turbo I got I purchased straight...
  9. R

    Factory 7.3 idi turbo to 6.9 questions

    I was thinking of poling a hole in it also, I did not know if it was supposed to be baffled though?
  10. R

    Factory 7.3 idi turbo to 6.9 questions

    My old turbo engineering setup gave way on my 6.9 idi so after some horrible customer service and lack of warranty from CX racing on a turbo that lasted 10 days I have purchased a factory 7.3 set up. I got everything minus the air box, the down pipe and any CDR stuff. So I ordered the Banks down...
  11. R

    down pipe removal

    Do you have a part number for the banks pipe?
See more

Latest posts

Forum statistics

Threads
91,345
Posts
1,130,760
Members
24,143
Latest member
Cv axle

Members online

Total: 178 (members: 3, guests: 175)

Share this page

Top