Recent content by NoGin_Cummins
-
1999 dodge cummins shifting problem
What kind of fluid are you running? I have heard about shudder complaints when running Dexron... ATF +4 usually helps....- NoGin_Cummins
- Post #8
- Forum: 5.9L 24 valve Cummins
-
check engine light... may be electrical?
I know ALL about the dying dodge on the side of the highway... I had a brand new 99 ram 3500 Laramie SLT, It was nothing but a nightmare. I almost never bought another dodge again, now I have a 97 with no electronics. A $56,000 Truck that that couldn't go a month without problems was...- NoGin_Cummins
- Post #4
- Forum: 5.9L 24 valve Cummins
-
What to do first with engine still on the stand??
Basically But the fuel solenoid on the P7100 requires 3 wires and a 70 amp relay It runs in 2 stages, A higher current to pull the plunger in, and a low current to hold it there, you could have a push button switch for the Initial Pull in, and just run the holding current thru your...- NoGin_Cummins
- Post #15
- Forum: 5.9L 12 valve Cummins
-
Getting exited about Biodiesel
There is one station out here that sells bio diesel in 20, 40, and I believe 80%, it is quite a bit cheaper than regular diesel, But I was told by the owner of the station himself, along with a few other people, to install auxilliary filters before running it because it tends to clog everything...- NoGin_Cummins
- Post #14
- Forum: General, Performance Upgrades & Accessories
-
COLD STARTING? TALKEETNA,ALASKA
I buy Motorcraft batteries from ford, they are very durable, My parents had a 1995 Aerostar minivan they bought new, the original battery lasted 7 years, that van itself was quite reliable, but ever since then I swear by Ford batteries.- NoGin_Cummins
- Post #4
- Forum: 5.9L 12 valve Cummins
-
Turbo Questions
I bought my H1C for $650 shipped straight from holset, an HX35 would have run me over $900, Chrysler wanted $1450, and cummins wanted $1200, The main thing you want to look for is shaft play, and wear or scrapes on the compressor intake, grab the shaft and wiggle it, there should be VERY...- NoGin_Cummins
- Post #2
- Forum: 5.9L 12 valve Cummins
-
Rotary pump and inline pump engine question
The old rotary (VE) pump 1989-1993 Is fuel lubricated, and The P7100 Inline pump 1994-1998 Is Oil lubricated, Also, The P7100 is equipped with AFC, which requires A source of Vacuum/boost to adjust air fuel ratio, that should be pretty easy to rig up, Also if I'm not mistaken I believe the VE...- NoGin_Cummins
- Post #2
- Forum: 5.9L 12 valve Cummins
-
1999 dodge cummins shifting problem
My thoughts exactly, I would say its probably your converter locking and unlocking, most people don't know the difference.- NoGin_Cummins
- Post #6
- Forum: 5.9L 24 valve Cummins
-
Transmissions behind mechanical cummins
The 47RH and the A518 are exactly the same transmission, Chrysler changed the way they numbered thier transmissions in I beleive 1993, The first digit 4: denotes the number of speeds (it's a 4 speed) The 2nd digit 7: stands for the strength ex. light duty front wheel drive is 41TE The...- NoGin_Cummins
- Post #8
- Forum: 5.9L 12 valve Cummins
-
tranny question guys....
Look for a wrecked frieghtliner 3 or 5 ton, they came with cummins b series engines and allison autos- NoGin_Cummins
- Post #8
- Forum: 5.9L 12 valve Cummins
-
Transmissions behind mechanical cummins
As far as im concerned e4od's are CRAP, I like fords, but even behind a gaspot those trannies are weak and are plagued with electrical issues. Like pipeliner86 said, The dodge 518's can be built to handle power, with a heavy duty low stall converter, a really good cooler, and ATF+4 I think...- NoGin_Cummins
- Post #4
- Forum: 5.9L 12 valve Cummins
-
96' 12 valve Cranking wheel then stalling
Whitmore... A little off topic but I must say your truck looks nearly identical to mine... same color same wheels and everything... when i first looked at the pic, i could have sworn it was mine lol..... nice truck- NoGin_Cummins
- Post #8
- Forum: 5.9L 12 valve Cummins
-
96' 12 valve Cranking wheel then stalling
I run colored fuel all the time, but I add 2 cycle oil to it, it turns it blue so it renders the government dye useless, and it works good as an additive, I have also had good luck adding half a gallon of used motor oil in my ford club wagon... but in my dodge I only use 2 cycle or clean motor...- NoGin_Cummins
- Post #6
- Forum: 5.9L 12 valve Cummins
-
96' 12 valve Cranking wheel then stalling
2 words RETURN FITTING.... On the return line from the Inj. pump to the fuel tank, the fitting has what i believe to be a spring and check ball to allow the pump to build a certain amount of pressure before the return line opens, cold stalling, hard starting, loss of power, or stalling after...- NoGin_Cummins
- Post #5
- Forum: 5.9L 12 valve Cummins
-
Couple of ? on a 1996 3500
I am on my 3rd cummins Ram, I have had 1 first gen 1993, then a 1999 which was a lemon. And now I have a 1997.. When I bought my truck it cranked 4 times and then started, I had the pump pulled because of an oil leak... and while it was out replaced the return fitting (it was losing...- NoGin_Cummins
- Post #3
- Forum: 5.9L 12 valve Cummins
