Recent content by MC770

  1. M

    Parking Brake

    I thought there had to be a spring or something I was missing Mine holds the truck, had a shop do an entire new brake system on the truck since all the lines were Rusty. Parking brake as well Perfect! Now I know what to go looking for, thanks! Hopefully I can get it back to normal, I'm a...
  2. M

    Parking Brake

    That's what I was thinking, wasn't sure if there was some kind of return spring I could replace/re-lube to get it back to normal. For now I've just got the switch the pedal contacts unplugged to keep the dash light off, a cheap bungee cord may be the way to go so I can at least have the light...
  3. M

    found on CL, 89 F-350 Lariat

    Here is a 1982 in NJ, looks to be in really good shape. No obvious rust showing https://southjersey.craigslist.org/cto/d/maple-shade-rare-diesel-69-idi-ford-250/7733866087.html
  4. M

    Parking Brake

    So I've had an issue with the parking brake since I purchased the truck. The pedal in the cab does not return all the way up when you release the pedal leaving the brake light on at the dash (it fully releases the parking brake but does not return far enough to depress the switch at the top of...
  5. M

    So what did you do with your truck today?

    Didn't really do much with it. Drove it over to Lowes to pick up some pipe for a sump pump and paint for the basement project. First time the trucks been driven since around thanksgiving, fired right up without issue (odd for it, usually needs a little ether after sitting that long with the fuel...
  6. M

    New guy to the IDIs

    Yeah you're correct the 650Rs where around 2000, meant to put the 600R the generation prior that the 650s replaced
  7. M

    New guy to the IDIs

    Also never put up any pictures of the old girl so I took some the other day,before the 6" of snow hit >:| Previous owner swapped in some later model OBS seats, glad he did I'm not the biggest fan of the bench seats that usually came in the older trucks Believe from what I've been able to tell...
  8. M

    New guy to the IDIs

    I plan on going older on the next project for sure lol This one holds a special place for me though I grew up during this era of Supercross & Motocross so I couldn't pass it up when it came up for dirt cheap near me. I did have 2 70's era CB750 street bikes I was working on for a little.. Ended...
  9. M

    New guy to the IDIs

    I've got a 2000 RM125 that I'm working on a full restoration of right now, got the frame sandblasted the other day and going to powder coat here soon. The drain bolt was stripped out when I got it so I'm on the hunt for a replacement at the moment, going to put a time-sert or something in the...
  10. M

    New guy to the IDIs

    Solid points, no worries about you being 'picky' on my end. I'm here to learn what I can and get help from the vast pool of knowledge here! Diesels are a relatively new venture for my I'm primarily familiar with dirt bikes (mainly 2strokes) and what I know of diesels comes from my past job as a...
  11. M

    New guy to the IDIs

    Hey all just wanted to take a minute and introduce myself to the forum. I've got a 1991 F250 Custom with a N/A 7.3 4wd with the ZF5 Manual transmission. I picked this truck up when I still lived in NC (now in Adams County, PA) after it had sat for ~5 years according to the previous owner. The...
Top