franklin2's latest activity
-
Ffranklin2 replied to the thread 1988 f-350 7.3 IDI need help with wiring harness.It only burnt up in the back? That should not be too hard to repair. I am going to redo my wiring back there anyway and mine never...
-
Ffranklin2 replied to the thread Manual swap.I would not swap the column, I would keep your old auto column. I have no problems with using my old auto column. I took the lever off...
-
Ffranklin2 replied to the thread Manual swap.Are you going to get the frontend also? If possible, I would try and at least get the front driveshaft and the front transfer case...
-
Ffranklin2 replied to the thread Manual swap.I did a manual swap on my 89. Your 91 is like my 89, not sure if the pedals will swap. I know 1986-dwn will not swap. I used a 89...
-
Ffranklin2 replied to the thread Glow plug amp draw.https://www.oilburners.net/threads/how-much-voltage-drop-do-should-the-glow-plugs-cause.72240/
-
Ffranklin2 replied to the thread Glow plug amp draw.I think you guys are way low. I seem to remember someone on here long ago did some testing and all of them together was a good bit over...
-
Ffranklin2 replied to the thread Clutch wont disengage.. Need ideas!!.Make sure there is plenty of fluid in the clutch master. Since you are driving it, if it's not completely dry any residual air will...
-
Ffranklin2 replied to the thread Speed control amplifier.I think your assumption would be correct on the speed sensor. If the speedometer is working, then you would think the speed sensor...
-
Ffranklin2 replied to the thread Automatically priming fuel system hack.Update on my china pump; Something is going on with it, it sounds terrible and the truck started but quit on me. I got it started...
-
Ffranklin2 replied to the thread Speed control amplifier.Many common places for failures. Your checks should have picked them up though. The electrical switches on the clutch pedal and the...
-
Ffranklin2 replied to the thread Carter P4070 Electric fuel pump failures..That's true, diesel would most like make a mess just like a mechanical oil pressure gauge would. Gasoline would definitely be more...
-
Ffranklin2 replied to the thread clutch master?.Think of it like gear ratios or sprockets. Small gear or sprocket turning a large gear or sprocket has a lot of power, but has to turn...
-
Ffranklin2 replied to the thread Putting Oil Change into the Tank.An experienced rebuilder can look at a pump and tell right away that dirty contaminated fuel has been run through it for awhile. The...
-
Ffranklin2 replied to the thread Carter P4070 Electric fuel pump failures..That won't be cheap. Those electric fuel pressure gauges are expensive.
-
Ffranklin2 replied to the thread Carter P4070 Electric fuel pump failures..Be careful and read the wording on your lifetime warranty. I have found going back to some stores, the warranty is lifetime...
