Recent content by bowhunter13

  1. B

    wiring harness for 94 IDI

    should there be power there when u push brake?
  2. B

    fuel gauge dances when in gear

    I will keep searching... Rear tank appears to be jacked up as it it MAXED out and i know its not full.. but front appears to be correct while in gear. I found issue with turnsignals and have 1 brake light.. I found some grounds and cleaned them and appear to be ok.. i will ohm them out as...
  3. B

    wiring harness for 94 IDI

    I just go turnsignals to work... Had to push in the hazzard button and replaced the fuse. there was power in an out of the fuse but when i put new on it ,, it worked. NOT sure I have no hazzards but im ok with that. brake light nly comes on over cab. Still lost on that.. Yes i change all...
  4. B

    fuel gauge dances when in gear

    thats one of the issues.. i dont know where they are all at.. front signals dont work either.. its almost like the harness is not connected. but i see nothing wrong
  5. B

    wiring harness for 94 IDI

    not sure i need to go that far, the harness i see looks great, i just need to know the color codes to ohm everything out and find the issue. I am sure it is something stuipd and simple.. im just pulling my hair out trying to find it.
  6. B

    fuel gauge dances when in gear

    with truck in PARK fuel gauge reads correct. put it in gear and it dances all over. anyone have any idea as to why??
  7. B

    wiring harness for 94 IDI

    looking for some help on wiring harness for brake lights and turnsignals . mine will not work and im lost.
  8. B

    turn signals and fuel gauge issues

    anywhere i can get a wiring diagrahm for a 94 F 350?? changed all bulbs, headlights work, back up and running lights NO turn signals and NO brake lights. any suggestion would be great. went to brake booster in eng bay, the sensor has power in and power out. both fuses are good in...
  9. B

    turn signals and fuel gauge issues

    anywhere i can get a wiring diagrahm for a 94 F 350?? changed all bulbs, headlights work, back up and running lights NO turn signals and NO brake lights. any suggestion would be great. went to brake booster in eng bay, the sensor has power in and power out. both fuses are good in...
  10. B

    turn signals and fuel gauge issues

    switch looks brand new.. im gonna pull it and see if i find any issues. still cant figure out the brake lights or fuel gauge. i am wondering now if i have a ground issue.
  11. B

    turn signals and fuel gauge issues

    just checked the headlight plug. i have power to 2 of the prongs. power at 1 with headlights, power to other with high beams. i think the center one is ground. no turn signals and no brake lights. there is power at the peddle and at the e brake connector.
  12. B

    turn signals and fuel gauge issues

    if headlight switch is bad , will it affect turn signals? high beam works just fine off turn signal arm.
  13. B

    turn signals and fuel gauge issues

    got this truck running good now, but i have NO turn signals or flashers. i have power at fuse panel but nothing happening. changed out the flasher deal, nothing fuel gage reads when in park, put it in gear and it jumps all over the place.. oh yeah headlights work in High only.. have to...
  14. B

    Pull glow plugs while hot or cold?

    just pulled mine on Wen, it was only about 40. i soaked them in PB for about an hour first. then took air hose and blew it all out. had no issues at at all (other than getting access to them), i did it in less than 2 hrs and had NO idea what i was doing. take your time and crank slow, dont...
  15. B

    new air induction, what about ccv tube

    Sorry for spelling issues. Doing this on a phone. Sorry vent is not in photo
See more

Latest posts

Forum statistics

Threads
91,372
Posts
1,131,195
Members
24,170
Latest member
Seven4eight

Members online

Total: 441 (members: 3, guests: 438)

Share this page

Top