Spend the money and buy a raptor, I've ran one on both of my cummins and they have been problem free so far with 50/50 blends, i have ran over 100 gallons of 50/50 threw my current one. cool thig is they have a built in bypass that is adjustable.
I've been doing a 50/50 cold filtering blend of D2 and mineral oil, also trow a couple of gallons of WMO in the mix too, working great so far! super thin too, wanna try 75/25 of mineral to kero
Well I'll tell my story then for my summer blending lately.... I've been blending about 50/50 with D2 and a Mineral oil found in a/c systems. I also throw in a quart of 2 stroke oil and a quart of naptha for an injector cleaner in to my mix of 50 gallons. I ster it all in one drum, let it sit...
i just feed the bleed off back into the feed line to the pump... so the bleed off line would be T'd into the line that comes from the tank and feeds the pump. make sense? Should just draw a picture in paint and upload it
Ive been filtering wmo for a few years now with heat filters and a centrifuge and i have noticed a problem on almost every setup i've seen built, even professional, and this reguards to the bleed off for maintaining the 80-90psi line pressure needed for centrifuge operation. Almost everyone ive...
Lol thats the first thing i did when i built mine. I keep scratching my head cuz i havebt seen anyone do it yet. They all just rethrn bleed off back to the tank! Maybe ill make a thread about it
Yeah idk if i would even take a chance on a 6.7 even without the dpf... for one injectors are $400 a piece and are very picky about fuel. I lost a set of injectors in my 05 and im leaning to the idea that it was caused by wmo... i had a fg 2 micron filter before the ip too. The stock filters...
I miss my 12 valve. It loved it too. My common rail didnt. But yes i just put a fuel pressure gauge on in and plan to do a raptor liftpump on shortly, they make a nice one that mounts in the stock location for 300. I just finished up 50 gallons of atf/screw compressor oil/ motor oil mixed with a...
Just wondering who on here is running waste oil in there cummins, what setup you have on your truck and what blends have been most successful for you. Im starting to get back in to the wmo thing and wanna key into what everyone else is doing before i setup my next truck. I have a pretty...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.