headhunter38
Latest activity Postings About
-
-
As the cupholder in question, I take my job very seriously. Maintaining that kind of grip strength is not for the weak. I would not... -
headhunter38 posted the thread PSA: For those replacing 4wd front shackle bushings with polyurethane, check your shackle first. in 6.9L IH & 7.3L IDI Diesels.If you have 4wd and are planning to replace your front shackle bushings with polyurethane bushings, check your shackles first. Some...
-
headhunter38 replied to the thread Cup holders.Agreed
-
A newer roll lets you turn quicker.
-
Or, tape the roll to the floor.
-
headhunter38 replied to the thread Cup holders.Nothing beats the roll of duck cup holder. Bonus use for reattaching stuff that falls off the truck. Just dont take turns too quickly.
-
-
headhunter38 replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.We ended up doing it this way. It went so easily after that. Re-attaching the axle beam to the springs was a lot easier than I thought...
-
headhunter38 reacted to Black dawg's post in the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs? with
Like.
Works best to not have the springs in there. Put pivot bolts in, then springs bolted to truck, then springs bolted to front end. -
headhunter38 reacted to franklin2's post in the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs? with Like.
When you do serious work like this on one of these leaf spring frontends, you come to realize how much of a bind the front leaves and...
-
headhunter38 replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.We tried using large chisels as wedges and got close. Ran out of wedging power with them. I think we try wooden ones then.
-
headhunter38 replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.My dad has a pry bar just like that. Its works but its too short to give me enough leverage to pry with.
-
headhunter38 replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.No. I didnt touch them. Im trying to save money and didnt want to take apart more stuff than I thought was necessary. Did you have the...
-
headhunter38 posted the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs? in 6.9L IH & 7.3L IDI Diesels.In the process of putting the front end of my truck back together after doing axle pivot, front leaf spring and shackle bushings. 1991...
-
headhunter38 replied to the thread I need help routing this wiring harness..Ok I figured it out finally. Took a break and worked on other parts of the truck for the last couple weeks. Someone had electrical taped...
-
-
headhunter38 replied to the thread Stp 15w40.I just switched to it after using rotella T4 and now im having major oil consumption. I had to add 2+ qts only 650 miles after the last...
-
-
Loading…
-
Loading…
