unexplainable issues.

[travisjulian]

You must be registered for see images

Just scraped this of 3 of 8 injectors. What is it?

 

[79jasper]

Looks like rust. Lol

Sent from my SM-G900R4 using Tapatalk

 

[travisjulian]

From what.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[79jasper]

Where'd you scrape it from?

Sent from my SM-G900R4 using Tapatalk

 

[travisjulian]

Round tip and copper washer

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[travisjulian]

Im ordering moose misters.im sure they were on there way out.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[travisjulian]

Anyone tryed having hogh pressure lines made. Been thinking about it something more flexible and easier to repair if needed.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[Agnem]

Do moose mister require headstuds or just the combo of pump and injectors.

Sent from my SAMSUNG-SM-N900A using Tapatalk

Depends on what pump and turbo you want to pair them up with.

As for your smooge on the brush, I would expect that to be rust, probably washed down with some kind of fuel or oil.

 

[travisjulian]

Stock pump banks turbo. I should be calling today for the moose misters after my wife shipps old injectors and sends me tracking number.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[laserjock]

Brake fluid becomes corrosive and Acidic over time .. brass and aluminum would'nt last at all ...

Copper work hardens over time and becomes brittle. Not something you want in a brake system either for things like the lines and fittings. Banjo bolt seals sure, why not.

 

[travisjulian]

Moose misters ordered

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[4x4manonbroke]

Copper work hardens over time and becomes brittle. Not something you want in a brake system either for things like the lines and fittings. Banjo bolt seals sure, why not.

Were talking about injector copper washers .. ? Brakes ?

 

[travisjulian]

Yes

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[travisjulian]

Easiest way to check compression. Take injectors out put plast bag in injector holes rotate engine and you will see the bags go downa and up lol

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[4x4manonbroke]

Some rust is not really uncommon , A bit of fuel, and some moisture, not a big deal, clean it out real good , if you can get a small wire brush - and some brake clean ..