Superduty coil spring question

[Ididriver]

On a side note.
Dose anybody know if the rear bracket you have to drill out if the holes will line up with the aftermarket bracket?

 

['94IDITurbo7.3]

any updates Chris?

 

[Ididriver]

Not really.
I dropped the truck to stock height so I can drive around because basically anybody I call for an alignment says "oh we don't work on big trucks"
That and spent this weekend doing body work.

Tommorw or the next day truck should be at minco for drop brackets tho.

 

['94IDITurbo7.3]

cool. good luck

 

[Ididriver]

Front suspension is completely off. Everything has poly urethane bushings. New tie rods new ball joints etc etc.

Take the axle pivot brackets off and the new brackets don't freaking fit.
Am I missing something here? Is there something special I have to do?
I knew I'd have to drill a few holes but these brackets would still pull the tires under the truck 4 inches. ***?

 

[Devon Harley]

Chris I finished mine I'm buying a stabilizer for it all send you pictures say screw it and bend them. Lol it wasn't very hard honestly.

 

[Ididriver]

Chris I finished mine I'm buying a stabilizer for it all send you pictures say screw it and bend them. Lol it wasn't very hard honestly.

Txt me the pics tommorw sometime.
I might just have to go the bending route.

 

[Devon Harley]

Will do.

 

[Ididriver]

New axle pivot bushings are here ( poly urethane) this makes everything poly urethane now.
Truck will go back toghter Sunday or Monday with stock brackets and well see what happens from there.
Probally just userhe camber bushings I have and cut the springs till it will bring camber back.