seal number for d-50 front passenger axle slip joint

[texcl]

Napa say they don't have a reference for it. this is the seal that is on the end of the slip joint at the middle u-joint. it is under the boot between the middle u-joint and the outer u-joint. Can find a reference # from any supplier. The original ford number is 4a460.

 

[mblaney]

Does this help? http://www.justdifferentials.com/DAN40929-p/dan40929.htm


https://quad4x4.com/ford50ifs1983-1997.html

 

[texcl]

I was actually looking for the seal that is under that boot, it goes over the end of the shaft. They had it listed on that website but it is discontinued .

 

[mblaney]

I couldn't find it either. Best fix is put in a D60

I did find an article on line stating that if your boot is good the seal is redundant.

Edit: I bet if you took the old one to a bearing shop they should be able to match something up. I have an old CR Seals catalogue at home (specific to automotive seals) I will take a look and see if I can find something.

 

[texcl]

Lol, I hear ya