SCORE!!

[benton]

i scored a set of aluminum 8lug turbine/hurricane wheels for free from a good friend of mine and they have 33x12 courser all terrains on them that are almost brand new. my question it will they fit my truck (which it stock height) with out rubbing?

 

[snaponprofile]

If they were off a sterling 10.5, they wont work the bolt pattern is different.

 

[benton]

they were on a 82 dodge w350 then my buddys 78 k20. its seems like they fit almost any older 8 lug truck with 6.5 bolts circle!

 

[snaponprofile]

I dunno about that. Never tried it.

 

[Hoss6.9]

This one has 33x12.50-16.5's on it at stock height. And there is no rubbing. Even with the V-plow on the front. These mag 5 slots have been on 5 different trucks of mine now. 3 Chevys and 2 Fords....

 

[benton]

nice truck and the rims look cool as hell!!!! that makes me happy knowing that they wont rub!

 

[88beast]

one you told me you worked hard for them towing his pos home
and 2 told u theyd work!!!!!!!!!!!1

 

[Militaryman445]

I have 35/12.5x 16r's on my stock 8 lugs with my stock height and they barely rub at all. Full lock to lock is approved

 

[Diesel_brad]

I had to trim my bumper inner corners to clear 33/12.50s on a 9.75 wheels

96 f350 4wd

 

[Militaryman445]

I had to trim my bumper inner corners to clear 33/12.50s on a 9.75 wheels

96 f350 4wd

My bumper is already "trimmed" well, kinda. It was pushed forward by a wreck that the PO was in So the 35's clear just fine. They only rub on the broken rubber protector thing thats on the back side of my shock tower. But its just flappin around so thats expected.

 

[IDIDieselJohn]

Is it the same kind of Turbines as these?

You must be registered for see images attach

 

[benton]

one you told me you worked hard for them towing his pos home
and 2 told u theyd work!!!!!!!!!!!1

calm your self tom lol i was just makin sure! and my 86 460 truck worked hard pullin his pos chevy

 

[benton]

and yes john they look just like that but 8lug

 

[GOOSE]

I had to trim the front bumper on my '92 F250 IDI 4x4 to fit 33/12.50/16.5's on 16.5x9.75 rims. I followed forward wheel well angle and took about 3" off. Worked like a charm.

 

[88beast]

relax benton but ya u gotta remember chevys have tons of dirt in them weighing them down a few extra thousannd pounds well thats wat u gotta claim