Rotary barrel pump thread size????
- Thread starter Brad S.
- Start date
AcIdBuRn02ZTS
Full Access Member
Copied from an instruction .pdf
"The outlet discharge spout is thread size ¾-11½ AN. This is
the common thread found on most aftermarket hoses."
However, from what I'm reading, it differs from brand to brand. What brand of pump do you have and what model?
"The outlet discharge spout is thread size ¾-11½ AN. This is
the common thread found on most aftermarket hoses."
However, from what I'm reading, it differs from brand to brand. What brand of pump do you have and what model?
Crap, can't remember right now, but did get it from a Northern Tool store.
Thanks for that info, I'll just take the outlet off, then get the right part.
I have a long length of 1" hose clamped on the curved outlet pipe.
Would like something threaded in, more of a right angle to the pump rather then curved pipe.
Thanks for that info, I'll just take the outlet off, then get the right part.
I have a long length of 1" hose clamped on the curved outlet pipe.
Would like something threaded in, more of a right angle to the pump rather then curved pipe.
79jasper
Chickenhawk
What's the part number on yours?
Be easier to just take it in.
I would think it has npt.
Sent from my iPhone using Tapatalk
Be easier to just take it in.
I would think it has npt.
Sent from my iPhone using Tapatalk
The FNG
NOT a Powerstroke!
I had a nozzle that came with a fill-rite pump and hose at one point that had similar threads. It got damaged at one point and I wasn't able to find anything to fit the threads, so I just bought another one. Hopefully you have better luck.
